Premium Information is available for this item - Upgrade for $1 a day
3040-01-116-2200
Shouldered Shaft
3040011162200 011162200 16A1400-67
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
11
Marketplace 3040-01-116-2200
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-116-2200 3+ Documents (More...)
RQST Updated Every Day 3040-01-116-2200 RQST NE Related Documents 3040-01-116-2200 3+ Documents ( More
RQST NS Request Quotation Updated Every Day 3040-01-116-2200 RQST NE Updated Every Day 3040-01-116-2200
Shouldered Shaft 3040011162200 011162200 RQST NE Updated Every Day 3040-01-116-2200 RQST Updated
Every Day 3040-01-116-2200 RQST NE Related Documents 3040-01-116-2200 2+ Documents ( More... ) https
Restrictions 3040-01-116-2200
3040-01-116-2200 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-116-2200
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-116-2200
- National Security Agency (DGX1)
- Effective Date:
- 1 Jan 2007
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3040-01-116-2200
- Part Number
- Manufacturer
- Status
- 16A1400-67
- Manufacturer
- 81755 - Lockheed Martin Corporation (Active)
- Primary Buy
- Primary Buy
- 16A1400-67
- 33927 - Southwest Machine & Manufacturing (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-116-2200
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.6250 Inches Nominal
- First End Style [AAGZ]
- Plain
- Material [MATT]
- Steel Corrosion Resisting
- Largest Step Diameter [CSPY]
- 0.625 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.3300 Inches Nominal
- Second End Groove Width [AAHW]
- 0.5000 Inches Nominal
- Second End Diameter [AMFZ]
- 0.6250 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 0.1200 Inches Nominal
- Second End Style [AAHP]
- Circular Grooved
- Overall Length [ABHP]
- 1.500 Inches Nominal
- Step Quantity [ATPC]
- 3
DLA Procurement Analysis 3040-01-116-2200
Management Data 3040-01-116-2200
Similar Supply Items to 3040-01-116-2200
Freight Information 3040-01-116-2200
3040-01-116-2200 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-116-2200 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-116-2200 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-116-2200 is not classified as a special type of cargo when transported by water. 3040-01-116-2200 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-116-2200
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- MIL-DTL-117, Type III, Class C, Style 1, Medium Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-01-116-2200 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: