Premium Information is available for this item - Upgrade for $1 a day
3040-01-108-1893
Straight Shaft
3040011081893 011081893 414132-1 214132-1
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
May 2023
4
Marketplace 3040-01-108-1893
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-108-1893 1+ Documents (More...)
Restrictions 3040-01-108-1893
3040-01-108-1893 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-108-1893
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-108-1893
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTHD
Approved Sources 3040-01-108-1893
- Part Number
- Manufacturer
- Status
- 214132-1
- Manufacturer
- 16848 - Lockheed Martin Sippican, Inc. (Active)
- Primary Buy
- Primary Buy
- 414132-1
- 16848 - Lockheed Martin Sippican, Inc. (Active)
- Advisory Reference
- Advisory Reference
Datasheet 3040-01-108-1893
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.2490 Inches Minimum And 0.2500 Inches Maximum
- First End Flat Depth [AMCW]
- 0.0310 Inches Nominal
- First End Flat Length [AMCX]
- 0.380 Inches Nominal
- First End Style [AAGZ]
- Flatted
- Material Document And Classification [MDCL]
- Qq-S-763,Class 304,Cond A Fed Spec Single Material Response
- Material [MATT]
- Steel Corrosion Resisting
- Second End Diameter [AMFZ]
- 0.2490 Inches Minimum And 0.2500 Inches Maximum
- Second End Internal Thread Length [AMHP]
- 0.250 Inches Nominal
- Second End Style [AAHP]
- Internal Threaded
- Overall Length [ABHP]
- 1.000 Inches Nominal
- Surface Finish [CSYM]
- 63.0 Microinches
Weapon Systems (WSDC) 3040-01-108-1893
DLA Procurement Analysis 3040-01-108-1893
Management Data 3040-01-108-1893
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-108-1893
Freight Information 3040-01-108-1893
3040-01-108-1893 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-108-1893 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-108-1893 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-108-1893 is not classified as a special type of cargo when transported by water. 3040-01-108-1893 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-108-1893 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: