Premium Information is available for this item - Upgrade for $1 a day
3040-01-107-8092
Shouldered Shaft
3040011078092 011078092 315B137-1
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
8
Marketplace 3040-01-107-8092
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-107-8092 1+ Documents (More...)
Restrictions 3040-01-107-8092
3040-01-107-8092 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-107-8092
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-107-8092
- US Air Force (FUGC)
- Effective Date:
- 1 May 2015
- Israel (YD01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3040-01-107-8092
- Part Number
- Manufacturer
- Status
- 315B137-1
- Manufacturer
- 25693 - Meggitt Safety Systems Inc (Active)
- Primary Buy
- Primary Buy
- 315B137-1
- 17472 - Eaton Aerospace Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 315B137-1
- 72121 - Eaton Motor Site (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-01-107-8092
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- F16a-Acft
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.1280 Inches Nominal
- First End Style [AAGZ]
- Plain
- Material [MATT]
- Steel Corrosion Resisting
- Largest Step Diameter [CSPY]
- 0.375 Inches Nominal
- Second End Diameter [AMFZ]
- 0.3750 Inches Nominal
- Second End Style [AAHP]
- Plain
- Overall Length [ABHP]
- 0.562 Inches Nominal
- Special Features [FEAT]
- First End Bored 0.128 In. Dia And 0.122 In. Deep; Second End Bored 0.220 In. Dia And 0.440 In. Deep
- Step Quantity [ATPC]
- 2
- Surface Finish [CSYM]
- 16.0 Microinches
DLA Procurement Analysis 3040-01-107-8092
Management Data 3040-01-107-8092
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3040-01-107-8092
Freight Information 3040-01-107-8092
3040-01-107-8092 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 132330. A Sub NMFC of X. It has a NMFC Description of TRANSMISSIONS/CLUTCHES/PARTS,NOI. 3040-01-107-8092 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 64340 which rates the freight between FCL and LCL. 3040-01-107-8092 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 671 for ocean manifesting and military sealift. 3040-01-107-8092 is not classified as a special type of cargo when transported by water. 3040-01-107-8092 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-107-8092 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: