Premium Information is available for this item - Upgrade for $1 a day
3040-01-105-9480
Straight Shaft
3040011059480 011059480 606-3876-001 606-3876
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
May 2023
14
Marketplace 3040-01-105-9480
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-105-9480 5+ Documents (More...)
/fsg-30/fsc-3040/us
RQST NE Updated Every Day 3040-01-105-9480 RQST Updated Every Day 3040-01-105-9480 RQST NE Related
RQST NE Updated Every Day 4730-00-606-3876 RQST Updated /fsg-31/fsc-3120/uk 3120-99-606-3876 https//
4. 4730-00-606-3876 Marketplace Restrictions Day 4730-00-606-3876 RQST NE Restrictions 4730-00-606-3876
Straight Shaft 3040011059480 011059480 01-105-9480 RQST Updated Every Day 3040-01-105-9480 RQST
/fsg-31/fsc-3120/uk
3120-99-606-3876 RQST NE Restrictions https//www.nsnlookup.com /fsg-70/fsc-7030/dk 7030-22-606-3876
Request Updated Every Day 3120-99-606-3876 https https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01
NE FedMall Updated Every Day 4720-01-606-3876 RQST NE Updated Every Day 4720-01-606-3876 RQST Updated
Every Day 4720-01-606-3876 RQST NE Related Documents 4720-01-606-3876 2+ Documents ( More... ) https
-606-3876 /fsg-70/fsc-7030/dk 7030-22 -606-3876 /fsg-70/fsc-7030/dk 7030-22 -606-3876 /fsg-70/fsc-7030
/dk 7030-22 -606-3876 /fsg-70/fsc-7030 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-105-9480
Restrictions 3040-01-105-9480
3040-01-105-9480 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-105-9480
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-105-9480
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- KE
- Austria (WB01)
- Effective Date:
- 1 Feb 2005
- Egypt (YQ01)
- Effective Date:
- 1 Jan 2015
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 3040-01-105-9480
- Part Number
- Manufacturer
- Status
- 606-3876-001
- Manufacturer
- 13499 - Rockwell Collins, Inc. (Active)
- Primary Buy
- Primary Buy
- 606-3876
- 13499 - Rockwell Collins, Inc. (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-105-9480
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 0.3425 Inches Minimum And 0.3435 Inches Maximum
- First End Style [AAGZ]
- Plain
- Material Document And Classification [MDCL]
- Qq-S-764,Class 303,Cond A Fed Spec Single Material Response
- Material [MATT]
- Steel Corrosion Resisting
- Overall Length [ABHP]
- 1.218 Inches Nominal
- Special Features [FEAT]
- Bore Lg Of Shaft,0.250 In. Nom Dia
Weapon Systems (WSDC) 3040-01-105-9480
DLA Procurement Analysis 3040-01-105-9480
Management Data 3040-01-105-9480
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-105-9480
Freight Information 3040-01-105-9480
3040-01-105-9480 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-105-9480 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-105-9480 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-105-9480 is not classified as a special type of cargo when transported by water. 3040-01-105-9480 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-105-9480
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-105-9480 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: