Premium Information is available for this item - Upgrade for $1 a day
3040-01-103-8062
Shouldered Shaft
3040011038062 011038062 2642-343-03 ITEM 8 88-D-329 845-4558718 ITEM 8 845-4558718 2642-343-03
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
7
Marketplace 3040-01-103-8062
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-103-8062 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-103-8062 RQST NE Updated Every Day 3040-01-103-8062 RQST Updated
Every Day 3040-01-103-8062 RQST NE Related Documents 3040-01-103-8062 5+ Documents ( More... ) https
-02 G547-0003-264234303-02D4 7550479-264234303-02D4 845-4558718 ITEM 2D4 56-13-1088D4 2640-343X3-3D4
2642-343-03 ITEM 2D4 264234303-02D4 A tubular shaped unthreaded item with or without a flange at one
/fsg-31/fsc-3120/us
ITEM 15 2642-343-03 ITEM 15 A tubular shaped unthreaded item with or without a flange at one end designed
for $1 a day Upgrade your Account Upgrade 3120-01-105-7317Sleeve Bushing3120011057317 011057317 845-4558718
ITEM 4 G547-0001-264234303-4 2642-343-03 ITEM 4 264234303-4 7550477-264234303-4 2642-343-03 ITEM 4D4
Shouldered Shaft 3040011038062 011038062 ITEM 8 845-4558718 2642-343-03 A shaft having two or more
264234303-4D4 845-4558718 ITEM 4D4 7550477-264234303-4D4 G547-0001-264234303-4D4 A gear with teeth formed
ITEM 4 845-4558718 ITEM 4 4558718 A gear with teeth formed on the inner surface of a cylinder or
Restrictions 3040-01-103-8062
3040-01-103-8062 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a confirmed Commerce Control List Item (CCLI). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-103-8062
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-103-8062
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTHXHD
Approved Sources 3040-01-103-8062
- Part Number
- Manufacturer
- Status
- 2642-343-03 ITEM 8
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- 88-D-329
- 71905 - Derbyshire Machine & Tool Co (Active)
- Secondary Buy
- Secondary Buy
- 845-4558718 ITEM 8
- 80064 - Naval Ship Systems Command (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 845-4558718
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
- 2642-343-03
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-103-8062
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Comp 304
- Material Document And Classification [MDCL]
- Qq-S-763,Cond A Fed Spec Single Material Response
- First End Style [AAGZ]
- Woodruff Keyway And Circular Grooved
- First End Groove Width [AAHG]
- 0.2020 Inches Nominal
- First End Groove Diameter [AAHH]
- 0.2030 Inches Nominal
- First End Distance From End To Groove [AMCY]
- 0.172 Inches Nominal
- First End Keyway Width [AMCZ]
- 0.4062 Inches Nominal
- First End External Keyway Length [AMDE]
- 0.375 Inches Nominal
- First End Distance From Keyway Center To End [AMDH]
- 0.266 Inches Nominal
- First End Diameter [AMDL]
- 0.3090 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Two Flats
- Second End Diameter [AMFZ]
- 0.3090 Inches Nominal
- Second End Step Length [CTBM]
- 0.375 Inches Nominal
- Second End Angle Between Flats [CXYR]
- 90.0 Degrees Nominal
- Largest Step Diameter [CSPY]
- 0.309 Inches Nominal
- Overall Length [ABHP]
- 7.500 Inches Nominal
- Step Quantity [ATPC]
- 3
- Special Features [FEAT]
- 3Rd Flat Located 90 Degree From 2Nd Flat
Weapon Systems (WSDC) 3040-01-103-8062
DLA Procurement Analysis 3040-01-103-8062
- Last Stock Position:
- 1 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-01-103-8062
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-01-103-8062
Freight Information 3040-01-103-8062
3040-01-103-8062 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-103-8062 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-103-8062 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-103-8062 is not classified as a special type of cargo when transported by water. 3040-01-103-8062 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-103-8062
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
Procurement History 3040-01-103-8062 4 Records
Contracting Technical Data File (CTDF) 3040-01-103-8062 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: