Premium Information is available for this item - Upgrade for $1 a day
3040-01-098-7357
Shouldered Shaft
3040010987357 010987357 94236-1 94236
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-098-7357
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-098-7357 5+ Documents (More...)
Every Day 3040-01-098-7357 RQST NE Updated Every Day 3040-01-098-7357 RQST Updated Every Day 3040-01
/fsg-30/fsc-3040/us 3040-01-098-7357 Shouldered Shaft 3040010987357010987357 94236-194236 A shaft having
Shouldered Shaft 3040010987357 010987357 Restrictions Approved Sources Datasheet Management https
www.nsnlookup.com /fsg-67/fsc-6750/nl 6750-17-704-4790 4875Bevel Gearshaft3040995544875 995544875 94236
Bevel Gearshaft 3040995544875 995544875,94236 974-3958 Part NumberManufacturerStatus419/1/94236 -4875
Shouldered Shaft 3040010987357 010987357 4875Bevel Gearshaft3040995544875 995544875 https//www.nsnlookup.com
554-4875 Bevel Gearshaft 3040995544875 995544875,94236 974-3958 Part NumberManufacturerStatus419/1/94236
JavaScript in your web browser . 5998-99-974-3958Circuit Card Assembly5998999743958 999743958419/1/94236
FILTER,BAND PASS 6 EA NS Request Quotation Subscribe to View Vendor Details... 94236 FILTER,BAND PASS
Bevel Gearshaft 3040995544875 995544875,94236 974-3958 Part NumberManufacturerStatus419/1/94236 -4875
Restrictions 3040-01-098-7357
3040-01-098-7357 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-01-098-7357
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-098-7357
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- KE
Approved Sources 3040-01-098-7357
- Part Number
- Manufacturer
- Status
- 94236-1
- Manufacturer
- 77646 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
- 94236
- 77646 - Northrop Grumman Systems Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-098-7357
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Comp 321
- Material Document And Classification [MDCL]
- Mil-T-8808 Mil Spec Single Material Response
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 1.2000 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Unthreaded Cross Drilled
- Second End Diameter [AMFZ]
- 0.7500 Inches Nominal
- Second End Hole Diameter [AMGS]
- 0.1290 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 0.200 Inches Nominal
- Largest Step Diameter [CSPY]
- 1.200 Inches Nominal
- Overall Length [ABHP]
- 7.395 Inches Nominal
- Step Quantity [ATPC]
- 2
- Special Features [FEAT]
- Unthd Drilled Hole 0.136 In Dia,W/Inserted Tube,Located 3.220 In C To C Distance From Crossed Drilled Hole On 2Nd End
DLA Procurement Analysis 3040-01-098-7357
Management Data 3040-01-098-7357
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-098-7357
Freight Information 3040-01-098-7357
3040-01-098-7357 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-098-7357 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-098-7357 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-098-7357 is not classified as a special type of cargo when transported by water. 3040-01-098-7357 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-098-7357
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 5lb to 7.5lb, all dimensions less than 24"
- Above 110G
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- Any Suitable Container
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3040-01-098-7357 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: