Premium Information is available for this item - Upgrade for $1 a day
3040-01-098-2599
Shouldered Shaft
3040010982599 010982599 791-0033-001 791-0033
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
January 2023
11
Marketplace 3040-01-098-2599
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-098-2599 5+ Documents (More...)
3040-01-098-2599 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-098-2599
(greater than 0.031 inches (0.79 RQST NE Updated Every Day 3040-01-098-2599 RQST Updated Every Day 3040
Request a Quotation from participating marketplace vendors Request Related Documents 5305-99-791-0033
DEMIL https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-098-2599 Shouldered Shaft 3040010982599 010982599
5120-00-791-0033 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-51/fsc-5120/us 5120-00-791-0033
RQST NE Updated Every Day 5120-00-791-0033 RQST Updated Every Day 5120-00-791-0033 RQST NE Related Documents
Shouldered Shaft 3040010982599 010982599 vendors Request Restrictions 5305-99-791-0033 DEMIL https
Identification [AGAV]5826-01-015-0839,An/Arn-118Special Features [FEAT]Tuning Adjustment Shaft,P/N 791-0033
Shouldered Shaft 3040010982599 010982599 www.nsnlookup.com /fsg-51/fsc-5120/us 5120-00-791-0033
Restrictions 3040-01-098-2599
3040-01-098-2599 is a Shouldered Shaft that does not have a nuclear hardened feature, but does have another critical feature or features such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-01-098-2599
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-098-2599
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3040-01-098-2599
- Part Number
- Manufacturer
- Status
- 791-0033-001
- Manufacturer
- 13499 - Rockwell Collins, Inc. (Active)
- Primary Buy
- Primary Buy
- 791-0033
- 13499 - Rockwell Collins, Inc. (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-098-2599
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- 5826-01-015-0839
- Criticality Code Justification [CRTL]
- Amdl And Aahw And Aahx And Amfz
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.1887 Inches Minimum And 0.1892 Inches Maximum
- First End Style [AAGZ]
- Plain
- Material Document And Classification [MDCL]
- Qq-S-763,Class 303,Condtn A Fed Spec Single Material Response
- Material [MATT]
- Steel Comp 303
- Largest Step Diameter [CSPY]
- 0.237 Inches Minimum And 0.249 Inches Maximum
- Second End Diameter [AMFZ]
- 0.1887 Inches Minimum And 0.1892 Inches Maximum
- Second End External Thread Length [AMHA]
- 32.000 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.0740 Inches Minimum And 0.0760 Inches Maximum
- Second End Groove Width [AAHW]
- 0.0180 Inches Minimum And 0.0200 Inches Maximum
- Second End Distance From End To Groove [AMFQ]
- 0.078 Inches Nominal
- Second End Style [AAHP]
- Circular Grooved And Externally Threaded
- Overall Length [ABHP]
- 2.546 Inches Nominal
- Step Quantity [ATPC]
- 3
Similar Supply Items to 3040-01-098-2599
Freight Information 3040-01-098-2599
3040-01-098-2599 has freight characteristics managed by the General Services Administration (GSA).It has a National Motor Freight Classification (NMFC) of 063035. A Sub NMFC of X. It has a NMFC Description of SETS RADIO/TV AND RELATED ARTICLES. 3040-01-098-2599 is rated as class 125 when transported by Less-Than Truckload (LTL) freight. 3040-01-098-2599 is rated as class 125 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 35070 which rates the freight between FCL and LCL. 3040-01-098-2599 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72D for ocean manifesting and military sealift. 3040-01-098-2599 is not classified as a special type of cargo when transported by water. 3040-01-098-2599 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.