Premium Information is available for this item - Upgrade for $1 a day
3040-01-088-4792
Straight Shaft
3040010884792 010884792 532970
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
May 2023
2
Marketplace 3040-01-088-4792
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-088-4792 5+ Documents (More...)
/fsg-30/fsc-3040/us 3040-01-088-4792 Straight Shaft 3040010884792 010884792,532970 Updated Every Day
us 3040-01-088-4792 Straight Shaft 3040010884792 010884792,532970 (Identification) Updated Every Day
280-0466 Bushing Insulator 5970142800466 142800466 1781Circuit Card Assembly5998218531781 218531781 532970
www.nsnlookup.com /fsg-59/fsc-5998/ca 5998-21-853-1779 Circuit Card Assembly 5998218531779218531779 532970
www.nsnlookup.com /fsg-59/fsc-5998/ca 5998-21-853-1781 Circuit Card Assembly 5998218531781218531781 532970
enable JavaScript in your web browser . 5998-21-853 -1781Circuit Card Assembly5998218531781 218531781 532970
enable JavaScript in your web browser . 5970-14-280-0466Bushing Insulator5970142800466 142800466 532970
www.nsnlookup.com /fsg-59/fsc-5998/ca 5998-21 -1779 Circuit Card Assembly 5998218531779218531779 532970
www.nsnlookup.com /fsg-59/fsc-5998/ca 5998-21 -1779 Circuit Card Assembly 5998218531779218531779 532970
Bushing Insulator 5970142800466142800466 1781Circuit Card Assembly5998218531781 218531781 532970 enable
Restrictions 3040-01-088-4792
3040-01-088-4792 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-01-088-4792
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-088-4792
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
Approved Sources 3040-01-088-4792
- Part Number
- Manufacturer
- Status
- 532970
- Manufacturer
- 23382 - Fwd Seagrave Holdings Lp (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-088-4792
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Corrosion Resisting
- First End Style [AAGZ]
- Square (Round Corners)
- First End Diameter [AMDL]
- 0.3100 Inches Nominal
- First End Width Across Flats [ACKY]
- 0.310 Inches Nominal
- First End Step Length [CSQZ]
- 1.030 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Square And Cross Drilled Hole
- Second End Diameter [AMFZ]
- 0.3100 Inches Nominal
- Second End Width Across Flats [ACMD]
- 0.310 Inches Nominal
- Second End Hole Diameter [AMGS]
- 0.0780 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 0.120 Inches Nominal
- Second End Hole Depth [AMHD]
- 0.310 Inches Nominal
- Second End Step Length [CTBM]
- 1.030 Inches Nominal
- Overall Length [ABHP]
- 2.060 Inches Nominal
- Special Features [FEAT]
- Shaft Is Sq The Entire Lg;Shaft Has A Flat Washer Welded On Iaw Fwd Spec No. 531051,Washer Is 0.120 In. Lg,Located 0.850 In. Distance From Washer To First End
Weapon Systems (WSDC) 3040-01-088-4792
DLA Procurement Analysis 3040-01-088-4792
Management Data 3040-01-088-4792
Similar Supply Items to 3040-01-088-4792
Freight Information 3040-01-088-4792
3040-01-088-4792 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-088-4792 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-088-4792 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-088-4792 is not classified as a special type of cargo when transported by water. 3040-01-088-4792 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-088-4792
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 1, Corrosion Preventive, Solvent Cutback, Cold Application, Hard Film
- --
- --
- --
- Any Suitable Container
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-088-4792 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: