Premium Information is available for this item - Upgrade for $1 a day
3040-01-084-8515
Shouldered Shaft
3040010848515 010848515 515-4674115 ITEM 10 87552-0607 ITEM 10 515-4674115
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-084-8515
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-084-8515 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-084-8515 RQST NE Updated Every Day 3040-01-084-8515 RQST
Updated Every Day 3040-01-084-8515 RQST NE Related Documents 3040-01-084-8515 5+ Documents ( More...
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-084-8515 Shouldered Shaft 3040010848515 010848515
for $1 a day Upgrade your Account Upgrade 3040-01-084-8515Shouldered Shaft3040010848515 010848515 515
Shouldered Shaft 3040010848515 010848515 for $1 a day Upgrade your Account Upgrade 3040-01-084-
8515Shouldered Shaft3040010848515 010848515 515-4674115 ITEM 10 87552-0607 ITEM 10 515-4674115 A shaft
ITEM 9 87552-0607 ITEM 9 515-4674115 Managed by United States NSN Created on 1 Nov 1979 Data Last Changed
www.nsnlookup.com /fsg-48/fsc-4820/us 4820-01-085-1851 Inboard Valve Rod 4820010851851010851851 515-4674115
Shouldered Shaft 3040010848515 010848515 for $1 a day Upgrade your Account Upgrade 3040-01-084-
8515Shouldered Shaft3040010848515 010848515 515-4674115 ITEM 10 87552-0607 ITEM 10 515-4674115 A shaft
Restrictions 3040-01-084-8515
3040-01-084-8515 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-01-084-8515
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-084-8515
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-084-8515
- Part Number
- Manufacturer
- Status
- 515-4674115 ITEM 10
- Manufacturer
- 80064 - Naval Ship Systems Command (Active)
- Primary Buy
- Primary Buy
- 87552-0607 ITEM 10
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- 515-4674115
- 80064 - Naval Ship Systems Command (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-084-8515
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- First End Flat Length [AMCX]
- 1.500 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Overall Length [ABHP]
- 49.625 Inches Nominal
Weapon Systems (WSDC) 3040-01-084-8515
DLA Procurement Analysis 3040-01-084-8515
Management Data 3040-01-084-8515
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-084-8515
Freight Information 3040-01-084-8515
3040-01-084-8515 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-084-8515 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-084-8515 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-084-8515 is not classified as a special type of cargo when transported by water. 3040-01-084-8515 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-084-8515 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: