3040-01-083-9264

Shouldered Shaft

3040010839264 010839264 GN-27-19A

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft

Managed by United States

NSN Created on 4 Oct 1979

Data Last Changed
November 2023

NATO Update Count
5

NATO Data Quality

3040-01-083-9264 SHAFT,SHOULDERED 3040010839264 010839264 1/1 — NSN 3040-01-083-9264 (Generic Image) 1/1

Marketplace 3040-01-083-9264

Need Help?
Request a Quotation from participating marketplace vendors

Updated Every Day

3040-01-083-9264 RQST NE

Updated Every Day

3040-01-083-9264 RQST

Updated Every Day

3040-01-083-9264 RQST NE

Related Documents 3040-01-083-9264 5+ Documents (More...)

https//www.nsnlookup.com
/fsg-53/fsc-5340/us

5340-01-063-0051 Angle Bracket 5340010630051 010630051

5340-01-063-0051 5340010630051 010630051 is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. excludes brace (as modified); bracket (1), mounting; and bracket, shelf.

https//www.nsnlookup.com
/fsg-53/fsc-5310/us

5310-01-076-8064 Key Washer 5310010768064 010768064

5310-01-076-8064 5310010768064 010768064 is a washer of nonresilient material usually having two parallel bearing surfaces. the outside and/or inside edges have one or more protuberances. the ends and/or edges may be prebent at any angle or the protuberances may be prebent at any angle to the bearing surfaces. the keys or lugs may be fitted into keyways in adjacent material or they may be bent over after application to hold or lock one or more items in place. excludes thrust type washer.

https//www.nsnlookup.com
/fsg-43/fsc-4320/us

4320-01-061-9239 Pump Shaft Sleeve 4320010619239 010619239

4320-01-061-9239 4320010619239 010619239 is a tubular shaped metallic item designed to provide a replaceable wearing surface for a centrifugal pump shaft. see also bearing, sleeve; bushing, sleeve; and spacer, sleeve.

https//www.nsnlookup.com
/fsg-43/fsc-4320/us

4320-01-059-5978 Shouldered Shaft 4320010595978 010595978

4320-01-059-5978 4320010595978 010595978 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.

https//www.nsnlookup.com
/fsg-53/fsc-5330/au

5330-66-024-2244 Gasket 5330660242244 660242244,27-19B

5330-66-024-2244 5330660242244 660242244 is a deformable material which prevents the passage of matter through the joint formed when two faces are joined. it may be metallic or nonmetallic, lubricated or impregnated, solid or hollow cross section. it may be made to any predetermined dimension and shape. excludes flat disks, items made of felt material and items having joints. for round metal and plastic items with an aperture and a solid rectangular cross section, see washer, flat; shim; bearing, washer, thrust; and spacer ring. excludes disk, valve; seal, nonmetallic angle; seal, nonmetallic channel; seal, nonmetallic special shaped section; shielding gasket, electronic; and ring, sealing jar.

Restrictions 3040-01-083-9264

3040-01-083-9264 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is a US Munitions List Item and must be mutilated to scrap. This item is not suspected to be hazardous. This item does not contain a precious metal.

Approved Sources 3040-01-083-9264

Part Number
Manufacturer
Status
GN-27-19A: 14541 - Cooper Machinery Services Llc (Active); Primary Buy; RNCC 3 RNVC 2 DAC 6

NATO Stock Numbers Related to 3040-01-083-9264

3040-99-745-0364 3040-99-755-9883 3040-99-745-8625 3040-99-453-9216 3040-34-041-2697 2815-99-431-0240 3040-17-103-5548 6615-99-712-9419 3040-99-536-0934 3040-99-255-0763 3040-27-016-6690 3040-27-054-9543 3040-99-741-3407 3040-17-101-1477 3040-99-554-0073 3040-27-042-9161 3040-21-907-7078 3040-66-027-9140