Premium Information is available for this item - Upgrade for $1 a day
3040-01-077-2878
Shouldered Shaft
3040010772878 010772878 3224137 3224040 ITEM 13 3224042 ITEM 13
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-01-077-2878
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-077-2878 2+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-077-2878 RQST NE Updated Every Day 3040-01-077-2878 RQST
Updated Every Day 3040-01-077-2878 RQST NE Related Documents 3040-01-077-2878 2+ Documents ( More...
Shouldered Shaft 3040010772878 010772878 your Account Upgrade 3040-01-077-2878Shouldered Shaft3040010772878
010772878 3224137 3224040 ITEM 13 3224042 Documents 3040-01-077-2878 2+ Documents ( More... https//www.nsnlookup.com
Restrictions 3040-01-077-2878
3040-01-077-2878 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-077-2878
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-077-2878
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTJBHD
Approved Sources 3040-01-077-2878
- Part Number
- Manufacturer
- Status
- 3224137
- Manufacturer
- 10001 - Navair And Navsea Managed Original (Active)
- Primary Buy
- Primary Buy
- 3224040 ITEM 13
- 10001 - Navair And Navsea Managed Original (Active)
- Secondary Buy
- Secondary Buy
- 3224042 ITEM 13
- 10001 - Navair And Navsea Managed Original (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-01-077-2878
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 2.2500 Inches Nominal
- First End Groove Diameter [AAHH]
- 2.1250 Inches Nominal
- First End Groove Width [AAHG]
- 0.1250 Inches Nominal
- First End Distance From End To Groove [AMCY]
- 1.750 Inches Nominal
- First End External Thread Length [AMEA]
- 1.750 Inches Nominal
- First End Style [AAGZ]
- Circular Grooved And Externally Threaded
- Material Document And Classification [MDCL]
- Qq-N-281,Cl A,Cold Drawn,Stress Equalized,Form 1 Fed Spec Single Material Response
- Material [MATT]
- Copper Alloy
- Largest Step Diameter [CSPY]
- 2.495 Inches Nominal
- Second End External Thread Length [AMHA]
- 2.750 Inches Nominal
- Second End Groove Diameter [AAHX]
- 2.3120 Inches Nominal
- Second End Groove Width [AAHW]
- 0.1250 Inches Nominal
- Second End Diameter [AMFZ]
- 2.4370 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 2.625 Inches Nominal
- Second End Style [AAHP]
- Circular Grooved And Externally Threaded
- Overall Length [ABHP]
- 48.577 Inches Minimum And 48.617 Inches Maximum
- Step Quantity [ATPC]
- 3
- Surface Finish [CSYM]
- 63.0 Microinches
Weapon Systems (WSDC) 3040-01-077-2878
DLA Procurement Analysis 3040-01-077-2878
Management Data 3040-01-077-2878
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-077-2878
Freight Information 3040-01-077-2878
3040-01-077-2878 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-077-2878 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-077-2878 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-077-2878 is not classified as a special type of cargo when transported by water. 3040-01-077-2878 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-01-077-2878 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: