Premium Information is available for this item - Upgrade for $1 a day
3040-01-044-4657
Shouldered Shaft
3040010444657 010444657 716WPG4103-6 REVISION E PIECE 8
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
January 2023
3
Marketplace 3040-01-044-4657
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-044-4657 1+ Documents (More...)
3040-01-044-4657 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-044-4657
RQST NE Updated Every Day 3040-01-044-4657 RQST Updated Every Day 3040-01-044-4657 RQST NE Related Documents
Restrictions 3040-01-044-4657
3040-01-044-4657 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-044-4657
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-044-4657
- US Coast Guard (C056)
- Effective Date:
- 1 Jul 2010
- Former MOE Rule:
- C055
Approved Sources 3040-01-044-4657
- Part Number
- Manufacturer
- Status
- 716WPG4103-6 REVISION E PIECE 8
- Manufacturer
- 06101 - United States Coast Guard Yard (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-044-4657
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 2.5000 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Indented Flat Keyway
- Second End Keyway Width [AMFR]
- 0.6250 Inches Nominal
- Second End External Keyway Length [AMFS]
- 1.625 Inches Nominal
- Second End Keyway Depth [AMFT]
- 0.312 Inches Nominal
- Second End Distance From Keyway Center To End [AMFW]
- 2.062 Inches Nominal
- Second End Diameter [AMFZ]
- 2.6875 Inches Nominal
- Largest Step Diameter [CSPY]
- 3.000 Inches Nominal
- Overall Length [ABHP]
- 33.1875 Inches Nominal
- Step Quantity [ATPC]
- 5
- Special Features [FEAT]
- Used U.S. Coast Guard 378 Ft Class Cutters Nos. 716 Thru 726 Whec
- End Item Identification [AGAV]
- Used On Hydraulic Start Pump Drive Clutch Onboard 378 Ft Whec Coast Guard Vessels
NATO Stock Numbers Related to 3040-01-044-4657
Freight Information 3040-01-044-4657
3040-01-044-4657 has freight characteristics managed by the US Postal Service (USPS).. 3040-01-044-4657 has a variance between NMFC and UFC when transported by rail and the description should be consulted.