Premium Information is available for this item - Upgrade for $1 a day
3040-01-031-3997
Shouldered Shaft
3040010313997 010313997 77835-1 77835
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-031-3997
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-031-3997 5+ Documents (More...)
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 77835
FedMall Updated Every Day 3040-01-031-3997 RQST NE Updated Every Day 3040-01-031-3997 RQST Updated Every
Shouldered Shaft 3040010313997 010313997 for $1 a day Upgrade your Account Upgrade 3040-01-031-
3997Shouldered Shaft3040010313997 010313997 77835-1 Request a Quotation from participating marketplace
Shouldered Shaft 3040010313997 010313997 for $1 a day Upgrade your Account Upgrade 3040-01-031-
3997Shouldered Shaft3040010313997 010313997 77835 -1 77835 A shaft having two or more different diameters
219112692 web browser . 7510-21-911-2692Pressure Sensitive Adhesive Tape7510219112692 21911269239450 21200 77835
Shouldered Shaft Tape7510219112692 219112692 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-031-3997
-5 77835-005 A weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating
www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-911-7599 Counterbalance Weight 3040009117599009117599 77835
Restrictions 3040-01-031-3997
3040-01-031-3997 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-01-031-3997
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-031-3997
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTHD
Approved Sources 3040-01-031-3997
- Part Number
- Manufacturer
- Status
- 77835-1
- Manufacturer
- 82340 - L3harris Technologies, Inc. (Active)
- Primary Buy
- Primary Buy
- 77835
- 82340 - L3harris Technologies, Inc. (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-031-3997
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- Material Document And Classification [MDCL]
- Mil-T-6736,Type 1,Cond N Mil Spec Single Material Response
- First End Style [AAGZ]
- Unthreaded Cross Drilled
- First End Diameter [AMDL]
- 1.3750 Inches Nominal
- First End Hole Diameter [AMDX]
- 0.2500 Inches Nominal
- First End Distance From Hole Center To End [AMDZ]
- 0.375 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Unthreaded Cross Drilled
- Second End Diameter [AMFZ]
- 1.5000 Inches Nominal
- Second End Hole Diameter [AMGS]
- 0.2500 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 0.375 Inches Nominal
- Largest Step Diameter [CSPY]
- 1.500 Inches Nominal
- Overall Length [ABHP]
- 7.750 Inches Nominal
- Step Quantity [ATPC]
- 2
DLA Procurement Analysis 3040-01-031-3997
Management Data 3040-01-031-3997
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-01-031-3997
Freight Information 3040-01-031-3997
3040-01-031-3997 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-031-3997 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-031-3997 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-031-3997 is not classified as a special type of cargo when transported by water. 3040-01-031-3997 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-031-3997
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-21260, Preservative and Break-in Lubricating Oil, Internal Combustion Engine, Grade 10, 30 or 50
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-031-3997 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: