Premium Information is available for this item - Upgrade for $1 a day
3040-01-025-6078
Shouldered Shaft
3040010256078 010256078 203-4660711 127-203-400-401
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
4
Marketplace 3040-01-025-6078
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-025-6078 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-01-025-6078 RQST NE Updated Every Day 3040-01-025-6078 RQST
Updated Every Day 3040-01-025-6078 RQST NE Related Documents 3040-01-025-6078 5+ Documents ( More...
for $1 a day Upgrade your Account Upgrade 3040-01-025-6076Straight Shaft3040010256076 010256076 203-4660711
for $1 a day Upgrade your Account Upgrade 3040-01-025-6075Straight Shaft3040010256075 010256075 203-4660711
/fsg-30/fsc-3040/us
for $1 a day Upgrade your Account Upgrade 3040-01-025-6075Straight Shaft3040010256075 010256075 203-4660711
Shouldered Shaft 3040010256078 010256078 for $1 a day Upgrade your Account Upgrade 3040-01-025-
/fsg-30/fsc-3040/us
for $1 a day Upgrade your Account Upgrade 3040-01-025-6076Straight Shaft3040010256076 010256076 203-4660711
Shouldered Shaft 3040010256078 010256078 for $1 a day Upgrade your Account Upgrade 3040-01-025-
for $1 a day Upgrade your Account Upgrade 3040-01-025-6075Straight Shaft3040010256075 010256075 203-4660711
for $1 a day Upgrade your Account Upgrade 3040-01-025-6075Straight Shaft3040010256075 010256075 203-4660711
Restrictions 3040-01-025-6078
IUID Required
3040-01-025-6078 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-025-6078
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-025-6078
- US Navy (N2H4)
- Effective Date:
- 1 Apr 1991
- Supplementary Receivers:
- GG
Approved Sources 3040-01-025-6078
- Part Number
- Manufacturer
- Status
- 127-203-400-401
- Manufacturer
- 86069 - Standex Intl Corp Cape Ann Forge Div (Obsolete)
- Original Design
- Original Design
- 203-4660711
- 80064 - Naval Ship Systems Command (Active)
- Incomplete Secondary Reference
- Incomplete Secondary Reference
Datasheet 3040-01-025-6078
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 4.6880 Inches Nominal
- First End Style [AAGZ]
- Plain
- Material [MATT]
- Steel
- Largest Step Diameter [CSPY]
- 5.519 Inches Minimum And 5.520 Inches Maximum
- Overall Length [ABHP]
- 29.062 Inches Nominal
DLA Procurement Analysis 3040-01-025-6078
Management Data 3040-01-025-6078
Navy
- Cognizance:
- 3B
- Special Material Content:
- 9
- Non-Hazardous or Non-Sensitive Item
Similar Supply Items to 3040-01-025-6078
Freight Information 3040-01-025-6078
3040-01-025-6078 has freight characteristics managed by the Food and Drug Administration (FDA).It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-025-6078 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-025-6078 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-025-6078 is not classified as a special type of cargo when transported by water. 3040-01-025-6078 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-025-6078
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 4, corrosion preventive, solvent cutback, cold application, transparent, non-tacky
- MIL-PRF-121, Greaseproof, Waterproof Barrier
- Wood Blocking and Bracing, Fasteners, or Steel Strapping, for Tie-down purposes. Rubber tired wheels shall be blocked clear of the floor of the crate or skid and shall not be load bearing
- Not Applicable
- ASTM-D6251, Type III, Class 2, Overseas Cleated Plywood Box or ASTM-D6880, Class 2, Heavy Duty Nailed Wood Box
- --
- MIL-PRF-121, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3040-01-025-6078 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: