Premium Information is available for this item - Upgrade for $1 a day
3040-01-025-0511
Straight Shaft
3040010250511 010250511 40-0018651 40-0018601 40-0018651-A
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
August 2023
5
Marketplace 3040-01-025-0511
Request a Quotation from participating marketplace vendors
Updated Every 15 Minutes 
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 3040-01-025-0511 5+ Documents (More...)
/fsg-30/fsc-3040/us
Quotation Subscribe to View Vendor Details... 40-0018651 SHAFT,STRAIGHT 1 EA NS Request Quotation 40
BUY NE FedMall Updated Every Day 3040-01-025-0511 RQST NE Updated Every Day 3040-01-025-0511 RQST
Straight Shaft 3040010250511 010250511 /www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-025-0511
/fsg-30/fsc-3040/us
Straight Shaft 3040010250511 010250511 www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-025-0511 https
AssyUOMTechnical DocumentQuantative ExpressionDefense Logistics Agency (DS)IZDiscontinued-Use 3040-01-025-0511
Straight Shaft 3040010250511 010250511 Identification) 1/2 NSN 3040-01-025-0511 (Identification
Documents 4920-12-025-0511 1+ Documents ( More https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-025-0511
Straight Shaft 3040010250511 010250511 (Identification) 1/2 NSN 3040-01-025-0511 (Identification
Restrictions 3040-01-025-0511
3040-01-025-0511 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-01-025-0511
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-025-0511
- US Army (A920)
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZCL
- US Air Force (FXGC)
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- FXAX
- US Marine Corps (MC40)
- Effective Date:
- 1 Aug 2006
Approved Sources 3040-01-025-0511
- Part Number
- Manufacturer
- Status
- 40-0018651
- Manufacturer
- 1ML14 - Brinkley Technology Group Llc (Active)
- Primary Buy
- Primary Buy
- 40-0018601
- 1ML14 - Brinkley Technology Group Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 40-0018651-A
- 1ML14 - Brinkley Technology Group Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 40-0018651-A
- 28265 - Hercules Engine Co Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 40-0018601
- 28265 - Hercules Engine Co Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 40-0018651
- 28265 - Hercules Engine Co Inc (Obsolete)
- Informational Drawing
- Informational Drawing
Datasheet 3040-01-025-0511
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 0.6190 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Unthreaded Cross Drilled
- Second End Diameter [AMFZ]
- 0.6190 Inches Nominal
- Second End Hole Diameter [AMGS]
- 0.2530 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 0.420 Inches Nominal
- Second End Hole Depth [AMHD]
- 0.050 Inches Nominal
- Overall Length [ABHP]
- 3.280 Inches Nominal
- Special Features [FEAT]
- Furnished With One Bushing On First End 0.690 In. Lg And On Pin On Second End
DLA Procurement Analysis 3040-01-025-0511
Management Data 3040-01-025-0511
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Material Identification:
- B
- Consumable Repair Parts
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
Similar Supply Items to 3040-01-025-0511
Freight Information 3040-01-025-0511
3040-01-025-0511 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-025-0511 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-025-0511 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-025-0511 is not classified as a special type of cargo when transported by water. 3040-01-025-0511 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-025-0511
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-21260, Preservative and Break-in Lubricating Oil, Internal Combustion Engine, Grade 10, 30 or 50
- --
- --
- --
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 3040-01-025-0511 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: