Premium Information is available for this item - Upgrade for $1 a day
3040-01-017-5440
Shouldered Shaft
3040010175440 010175440 180951-2
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-01-017-5440
Request a Quotation from participating marketplace vendors
Related Documents 3040-01-017-5440 2+ Documents (More...)
(Identification) 1/2 NSN 3040-01-017-5440 (Identification) 2/2 - - 1.
RQST NE Updated Every Day 3040-01-017-5440 RQST Updated Every Day 3040-01-017-5440 RQST NE Related
8152 Radio Frequency Cable Assembly 5995017028152 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-01-017-5440
Shouldered Shaft 3040010175440 010175440 for $1 a day Upgrade your Account Upgrade 3040-01-017-
Restrictions 3040-01-017-5440
3040-01-017-5440 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-01-017-5440
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-01-017-5440
- National Security Agency (DGX1)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- DAX1
- Supplementary Receivers:
- AX
Approved Sources 3040-01-017-5440
- Part Number
- Manufacturer
- Status
- 180951-2
- Manufacturer
- 71791 - Curtiss-Wright Controls, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-01-017-5440
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 1.3600 Inches Nominal
- First End Style [AAGZ]
- Plain
- Fsc Application Data [ZZZV]
- Brake Slat Drive
- Material [MATT]
- Steel Corrosion Resisting
- Largest Step Diameter [CSPY]
- 1.468 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.800 Inches Nominal
- Second End Diameter [AMFZ]
- 1.2180 Inches Nominal
- Second End Style [AAHP]
- External Threaded
- Overall Length [ABHP]
- 7.420 Inches Nominal
- Step Quantity [ATPC]
- 5
- Surface Finish [CSYM]
- 63.0 Microinches
DLA Procurement Analysis 3040-01-017-5440
Management Data 3040-01-017-5440
Similar Supply Items to 3040-01-017-5440
Freight Information 3040-01-017-5440
3040-01-017-5440 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-01-017-5440 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-01-017-5440 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-01-017-5440 is not classified as a special type of cargo when transported by water. 3040-01-017-5440 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-01-017-5440
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- ASTM - D5118, Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3040-01-017-5440 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: