Premium Information is available for this item - Upgrade for $1 a day
3040-00-992-0952
Shouldered Shaft
3040009920952 009920952 16017
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
August 2023
19
Marketplace 3040-00-992-0952
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-992-0952 5+ Documents (More...)
Documents 3040-00-992-0952 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040
RQST NE Updated Every Day 3040-00-992-0952 RQST Updated Every Day 3040-00-992-0952 RQST NE Related Documents
-00187-16017 A grouping https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-992-0952 Shouldered Shaft
3040009920952 009920952 for $1 a day Upgrade your Account Upgrade 3040-00-992-0952Shouldered Shaft3040009920952
browser . 3110-99-740 https//www.nsnlookup.com /fsg-59/fsc-5940/it 5940-15-175-7641 Terminali Amp 16017
Documents ( More... ) https//www.nsnlookup.com /fsg -59/fsc-5940/it 5940-15-175-7641 Terminali Amp 16017
-1 F675-16017 A case specifically designed to hold one or more cable assemblies.
-1F675-16017 A case specifically designed to hold one or more cable assemblies.
-001 87-16017 A grouping of two or more physically connected or related electrical an/or electronic parts
-00187-16017 A grouping of two or more physically connected or related electrical an/or electronic /fsc
Restrictions 3040-00-992-0952
3040-00-992-0952 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-00-992-0952
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-992-0952
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTKE
- Brazil (YA01)
- Effective Date:
- 1 Dec 2001
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Malaysia (YW01)
- Effective Date:
- 1 Sep 1993
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Belgium (ZB01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Jul 1997
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3040-00-992-0952
- Part Number
- Manufacturer
- Status
- 16017
- Manufacturer
- 60399 - Regal-Beloit Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-00-992-0952
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- Aircraft Model H-3
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.9842 Inches Minimum And 0.9845 Inches Maximum
- First End Style [AAGZ]
- Plain
- Fsc Application Data [ZZZV]
- Aircraft Engine Cooling System Component
- Material [MATT]
- Steel Comp 4340
- Largest Step Diameter [CSPY]
- 1.180 Inches Nominal
- Second End Diameter [AMFZ]
- 0.5000 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.507 Inches Nominal
- Second End Style [AAHP]
- External Threaded
- Special Features [FEAT]
- 1St End 2Nd Step And 3Rd Step Each With 1 Woodruff Key 0.1240 In. Min And 0.1255 In. Max W,0.1355 In. Min And 0.1405 In. Max Dp
- Overall Length [ABHP]
- 5.200 Inches Minimum And 5.220 Inches Maximum
- Step Quantity [ATPC]
- 5
- Surface Finish [CSYM]
- 16.0 Microinches
DLA Procurement Analysis 3040-00-992-0952
Management Data 3040-00-992-0952
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-00-992-0952
Freight Information 3040-00-992-0952
3040-00-992-0952 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-992-0952 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-992-0952 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-992-0952 is not classified as a special type of cargo when transported by water. 3040-00-992-0952 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-992-0952
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- MIL-PRF-121, Type I, Medium Duty, Greaseproof, Waterproof Barrier
- A-A-1898, Grade II, Water Resistant Cellulosic Cushioning
- --
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
- No special marking
- MIL-PRF-121, Type I, Medium Duty, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3040-00-992-0952 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: