Premium Information is available for this item - Upgrade for $1 a day
3040-00-955-9613
Shouldered Shaft
3040009559613 009559613 56435
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
22
Marketplace 3040-00-955-9613
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-955-9613 5+ Documents (More...)
3040-00-955-9613 (Identification) 2/2 - - 1.
009559613 ALTDPS4019HS1P 56435 https//www.nsnlookup.com /fsg-58/fsc-5815/uk 5815-99-463-3289 Trip Rod
-99-745-3500 Pinch Ring 5325997453500 997453500,56435 Shaft 3040009559613 009559613 ALTDPS4019HS1P 56435
755-9786 Rod End Clevis 5340997559786 997559786,56435 Shaft 3040009559613 009559613 ALTDPS4019HS1P 56435
009559613 ALTDPS4019HS1P 56435 https//www.nsnlookup.com /fsg-58/fsc-5815/uk 5815-99-463-3289 Trip Rod
009559613 ALTDPS4019HS1P 56435 https//www.nsnlookup.com /fsg-58/fsc-5815/uk 5815-99-463-3289 Trip Rod
-9786 Rod End Clevis 5340997559786 997559786,56435 Shaft 3040009559613 009559613 ALTDPS4019HS1P 56435
enable JavaScript in your web browser . 6125-00-346-3614Motor Gener Winding6125003463614 003463614 56435
009559613 ALTDPS4019HS1P56435 Pinch Ring 5325997453500 997453500,56435 56435 enable JavaScript in your
enable JavaScript in your web browser . 6125-00-346-3614Motor Gener Winding6125003463614 003463614 56435
Restrictions 3040-00-955-9613
3040-00-955-9613 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-955-9613
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-955-9613
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- BD
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- KE
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Israel (YD01)
- Effective Date:
- 1 Mar 2017
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 May 2003
- Greece (ZU01)
- Effective Date:
- 1 Jul 1995
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 3040-00-955-9613
- Part Number
- Manufacturer
- Status
- 56435
- Manufacturer
- 93835 - Parker-Hannifin Corp (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-00-955-9613
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.6450 Inches Minimum And 0.6500 Inches Maximum
- First End Spline Length [AMDM]
- 0.812 Inches Minimum And 0.820 Inches Maximum
- First End Spline Major Diameter [AMDP]
- 0.6450 Inches Minimum And 0.6500 Inches Maximum
- First End Spline Minor Diameter [AMDN]
- 0.5500 Inches Nominal
- First End Spline Quantity [BDSQ]
- 12
- First End Style [AAGZ]
- Splined (Straight)
- Material [MATT]
- Steel Comp 17-4Ph
- Largest Step Diameter [CSPY]
- 0.7450 Inches Minimum And 0.7500 Inches Maximum
- Material Document And Classification [MDCL]
- Ams-5643,Comp 17-4Ph Assn Std Single Material Response
- Second End Diameter [AMFZ]
- 0.7450 Inches Minimum And 0.7500 Inches Maximum
- Second End Pitch Diameter [AMGF]
- 0.6875 Inches Nominal
- Second End Pressure Angle [AMGE]
- 30.0000 Degrees Nominal
- Second End Spline Length [AMGA]
- 0.781 Inches Nominal
- Second End Spline Major Diameter [AMGC]
- 0.7450 Inches Minimum And 0.7500 Inches Maximum
- Second End Spline Minor Diameter [AMGB]
- 0.5973 Inches Minimum And 0.6085 Inches Maximum
- Second End Spline Quantity [BDSR]
- 11
- Second End Style [AAHP]
- Splined (Involute)
- Overall Length [ABHP]
- 1.843 Inches Nominal
- Step Quantity [ATPC]
- 4
DLA Procurement Analysis 3040-00-955-9613
Management Data 3040-00-955-9613
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Mar 2023
- Department of the Navy (DN)
- EA
- Subscribe
- 1
- EA
- Oct 2022
- Department of the Army (DA)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Army (DA)
- EA
- Subscribe
- 1
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Navy (DN)
- N
- X
- Formerly 1650
- X
- Defense Logistics Agency (DS)
- I
- X
- Formerly 1650
- X
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-00-955-9613
Freight Information 3040-00-955-9613
3040-00-955-9613 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-955-9613 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-955-9613 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-955-9613 is not classified as a special type of cargo when transported by water. 3040-00-955-9613 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-955-9613
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3040-00-955-9613 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: