Premium Information is available for this item - Upgrade for $1 a day
3040-00-950-8456
Straight Shaft
3040009508456 009508456 76001
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
May 2023
19
Marketplace 3040-00-950-8456
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-950-8456 5+ Documents (More...)
NE Updated Every Day 3040-00-950-8456 RQST Updated Every Day 3040-00-950-8456 /fsc-3040/us 3040-00-950
-8456 Straight Shaft 3040009508456 009508456,76001 United States (US) 4. 3040 SHAFT,STRAIGHT 99 Day 3040
( More... ) https//www.nsnlookup.com /fsg-58/fsc-5895/uk 5895-99-733-8652 EA NS Request Quotation 76001
PRINTER,AUTOMATIC DATA PROCESSING 8 EA NS Request Quotation 76001 PRINTER,AUTOMATIC DATA PROCESSING
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-950-8456 Straight Shaft 3040009508456 009508456,76001
SHAFT,STRAIGHT 4 EA NS Request Quotation Subscribe to View Vendor Details... 76001 SHAFT,STRAIGHT 99
PRINTER,AUTOMATIC DATA PROCESSING 8 EA NS Request Quotation 76001 PRINTER,AUTOMATIC DATA PROCESSING
Updated Every Details... 76001 PRINTER,AUTOMATIC DATA PROCESSING 8 EA NS Request Quotation 76001 PRINTER
Updated Every Details... 76001 PRINTER,AUTOMATIC DATA PROCESSING 8 EA NS Request Quotation 76001 PRINTER
-07-76001 93459 - Spectrum 15-07-76001 Approved Sources 5962-01-257-6574 Part NumberManufacturerStatus15
Restrictions 3040-00-950-8456
3040-00-950-8456 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-00-950-8456
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-950-8456
- US Army (A920)
- Effective Date:
- 1 May 2010
- Former MOE Rule:
- A703
- Supplementary Receivers:
- CT
- Brazil (YA01)
- Effective Date:
- 1 Oct 2000
- Spain (YB01)
- Effective Date:
- 1 Dec 1996
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Mar 1999
- Greece (ZU01)
- Effective Date:
- 1 Apr 2008
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 3040-00-950-8456
- Part Number
- Manufacturer
- Status
- 76001
- Manufacturer
- 11599 - Triumph Engine Control Systems Llc (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-00-950-8456
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 0.0766 Inches Minimum And 0.0776 Inches Maximum
- First End Hole Depth [AMEB]
- 0.0766 Inches Minimum And 0.0776 Inches Maximum
- First End Distance From Hole Center To End [AMDZ]
- 0.0500 Inches Minimum And 0.0600 Inches Maximum
- First End Style [AAGZ]
- Unthreaded Cross Drilled
- First End Hole Diameter [AMDX]
- 0.0210 Inches Minimum And 0.0310 Inches Maximum
- Material [MATT]
- Steel
- Overall Length [ABHP]
- 0.7450 Inches Minimum And 0.7550 Inches Maximum
DLA Procurement Analysis 3040-00-950-8456
Management Data 3040-00-950-8456
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 3
- Insurance Items
This code will identify items for which there may be occasional intermittent demands not sufficiently repetitive to warrant classification as regular stock items, but for which prudence requires that nominal quantity be stocked for the reason that the essentiality of the item and the long lead time required to obtain such items by purchase would create an unacceptable situation if no stock were carried.
- Weapons System / End Item / Homogeneous Group:
- BB
- Rotary Wing Aircraft
AH-1, UH-1, OV-1 Turbine Engine
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 3040-00-950-8456
Freight Information 3040-00-950-8456
3040-00-950-8456 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-950-8456 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-950-8456 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-950-8456 is not classified as a special type of cargo when transported by water. 3040-00-950-8456 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-950-8456 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: