Premium Information is available for this item - Upgrade for $1 a day
3040-00-884-4728
Shaft Collar
3040008844728 008844728 11581-5
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID. View more Shaft Collar
May 2023
5
Marketplace 3040-00-884-4728
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-884-4728 5+ Documents (More...)
Restrictions 3040-00-884-4728
3040-00-884-4728 is a Shaft Collar that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 3040-00-884-4728
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
Approved Sources 3040-00-884-4728
- Part Number
- Manufacturer
- Status
- 11581-5
- Manufacturer
- 14632 - Drs Signal Solutions, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-00-884-4728
- Characteristic
- Specifications
- FIIG
- Specifications
- A231A0
- Angle Between Centerlines Of Securing Holes In Deg [AHYG]
- 90.0
- Bore Diameter [ABXV]
- 0.1250 Inches Minimum And 0.1260 Inches Maximum
- Material [MATT]
- Copper Alloy
- Nominal Thread Size And Location [CRWB]
- 0.112 Inches Single Hole
- Outside Diameter [ABKV]
- 0.440 Inches Nominal
- Screw Thread Series Designator And Location [CQBP]
- Single Hole Unc
- Securing Hole Quantity [AHYF]
- 2
- Securing Hole Type And Location [CQKB]
- Threaded Single Hole
- Style Designator [STYL]
- Plain Round
- Surface Treatment [SFTT]
- Cadmium
- Thickness [ABNM]
- 0.190 Inches Nominal
DLA Procurement Analysis 3040-00-884-4728
Management Data 3040-00-884-4728
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-00-884-4728
Freight Information 3040-00-884-4728
3040-00-884-4728 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126880. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING PULLEYS. 3040-00-884-4728 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 64300 which rates the freight between FCL and LCL. 3040-00-884-4728 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-884-4728 is not classified as a special type of cargo when transported by water. 3040-00-884-4728 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-884-4728 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: