Premium Information is available for this item - Upgrade for $1 a day
3040-00-859-6118
Rigid Connecting Link
3040008596118 008596118 NAS356 NAS356-64-550
An item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified). View more Rigid Connecting Link
November 2023
21
Marketplace 3040-00-859-6118
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-859-6118 5+ Documents (More...)
Rigid Connecting Link 3040008596118 008596118 3040-00-859-6118 3040008596118 008596118 is an item
NAS356-64-2638 An item of various cross-sectional shapes which may be of solid or hollow construction
NAS356-64-1240 An item of various cross-sectional shapes which may be of solid or hollow construction
NAS356-64-1240 An item of various cross-sectional shapes which may be of solid or hollow construction
NAS356-84-1209 An item of various cross-sectional shapes which may be of solid or hollow construction
NAS356-64-490 An item of various cross-sectional shapes which may be of solid or hollow construction
NAS356-84-1209 An item of various cross-sectional shapes which may be of solid or hollow construction
NAS356-84-1209 An item of various cross-sectional shapes which may be of solid or hollow construction
NAS356-63-590 An item of various cross-sectional shapes which may be of solid or hollow construction
Restrictions 3040-00-859-6118
3040-00-859-6118 is a Rigid Connecting Link that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-859-6118
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-859-6118
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- BDCT
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTKE
- Brazil (YA01)
- Effective Date:
- 1 Oct 2000
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Jul 1995
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 3040-00-859-6118
- Part Number
- Manufacturer
- Status
- NAS356
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- NAS356-64-550
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-00-859-6118
- Characteristic
- Specifications
- FIIG
- Specifications
- A524L0
- End Attachment Fork Width [BFNP]
- 0.312 Inches Nominal Both Ends
- End Attachment Hole Diameter [BFLD]
- 0.188 Inches Nominal Both Ends
- End Attachment Length [BFNL]
- 1.750 Inches Nominal Second End
- End Attachment Length [BFNL]
- 2.125 Inches Nominal First End
- End Attachment Style [AJUD]
- Clevis No. 2 Both Ends
- Body Construction [AZHL]
- Tubular
- Body Diameter [ABPM]
- 0.375 Inches Nominal
- Material Document And Classification [MDCL]
- Ww-T-700/3, T-3 Fed Spec Single Material Response
- Material [MATT]
- Aluminum Alloy
- Overall Length [ABHP]
- 5.750 Inches Nominal
- Special Features [FEAT]
- Ueffective Length: 5.500 Inches; End Attachment Info: Diameter 0.500 Inch, Material Steel Both Ends, Surface Treatment Cadmium Plated Both Ends, Fork Depth 1.000 Inch, Fork Span Width 0.141 Inch, Used On Aircraft Fuselage Section
- Surface Treatment [SFTT]
- Zinc
Weapon Systems (WSDC) 3040-00-859-6118
DLA Procurement Analysis 3040-00-859-6118
- Last Stock Position:
- 9 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-00-859-6118
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-00-859-6118
Freight Information 3040-00-859-6118
3040-00-859-6118 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 095630. A Sub NMFC of X. It has a NMFC Description of LAP/CONNECTING LINKS/RINGS STEEL. 3040-00-859-6118 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50070 which rates the freight between FCL and LCL. 3040-00-859-6118 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 3040-00-859-6118 is not classified as a special type of cargo when transported by water. 3040-00-859-6118 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-859-6118 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: