Premium Information is available for this item - Upgrade for $1 a day
3040-00-841-6144
Shouldered Shaft
3040008416144 008416144 701200
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
4
Marketplace 3040-00-841-6144
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-841-6144 5+ Documents (More...)
-1 701200 A device of various shapes to be permanently attached to the structure of an aircraft.
day Upgrade your Account Upgrade 5996-00-849-7532Direct Current Amplifier5996008497532 008497532 701200
/fsg-59/fsc-5996/us
AMPLIFIER,DIRECT CURRENT 1 EA NS Request Quotation Subscribe to View Vendor Details... 701200 AMPLIFIER
browser . 5940-12-172-1832Terminal Board5940121721832 121721832 NO PRIMARY REF 12-172-1832 1000078-701200
day Upgrade your Account Upgrade 5996-00-849-7532Direct Current Amplifier5996008497532 008497532 701200
AMPLIFIER,DIRECT CURRENT 1 EA NS Request Quotation Subscribe to View Vendor Details... 701200 AMPLIFIER
/fsg-59/fsc-5940/de
172-1832 is a Terminal Board Approved Sources 5940-12-172-1832 Part NumberManufacturerStatus1000078-701200
D1839 - Baainbw Dokumente Ohne (Active) Canceled/Obsolete RNCC 5 RNVC 9 DAC 9 1000078-701200 D8348 -
Restrictions 3040-00-841-6144
3040-00-841-6144 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a confirmed Commerce Control List Item (CCLI). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-00-841-6144
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-841-6144
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
Approved Sources 3040-00-841-6144
- Part Number
- Manufacturer
- Status
- 701200
- Manufacturer
- 99167 - Hamilton Sundstrand Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-00-841-6144
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Identical
- First End Style [AAGZ]
- Plain
- Fsc Application Data [ZZZV]
- Drive,Constant Speed,Hydraulic
Weapon Systems (WSDC) 3040-00-841-6144
DLA Procurement Analysis 3040-00-841-6144
- Last Stock Position:
- 6 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-00-841-6144
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- HS
- AIRCRAFT HYDRAULIC SYSTEMS AND COMPONENTS
- Price Validation Code:
- D
- The contract unit price, which is the basis for the standard price, has been analyzed and is considered to be excessive. Price change is deferred because the item is not in a buy status.
The price has been analyzed. The price is excessive but a service or agency of the Department of Defense did pay that price.
While the future price is unknown, the proper price range has been established.
ZOP or Standard price challenges will be accepted but must be supported by adequate justification. In most cases, unless new information is presented, the challenge will be closed as a duplicate challenge.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3040-00-841-6144
Freight Information 3040-00-841-6144
3040-00-841-6144 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-841-6144 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-841-6144 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-841-6144 is not classified as a special type of cargo when transported by water. 3040-00-841-6144 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-841-6144
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- MIL-PRF-121, Greaseproof, Waterproof Barrier
- --
- --
- ASTM - D5118, Fiberboard Box
- No special marking
- MIL-PRF-121, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Procurement History 3040-00-841-6144 1 Records
Contracting Technical Data File (CTDF) 3040-00-841-6144 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: