Premium Information is available for this item - Upgrade for $1 a day
3040-00-840-1079
Straight Shaft
3040008401079 008401079 184-861
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
May 2023
3
Marketplace 3040-00-840-1079
Request a Quotation from participating marketplace vendors
Restrictions 3040-00-840-1079
3040-00-840-1079 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-840-1079
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-840-1079
- National Security Agency (DGX1)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- DAX1
- Supplementary Receivers:
- AX
Approved Sources 3040-00-840-1079
- Part Number
- Manufacturer
- Status
- 184-861
- Manufacturer
- 90073 - Cmc Electronics Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-00-840-1079
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.1250 Inches Nominal
- First End Groove Diameter [AAHH]
- 0.0950 Inches Nominal
- First End Groove Width [AAHG]
- 0.0180 Inches Nominal
- First End Distance From End To Groove [AMCY]
- 0.443 Inches Nominal
- First End Style [AAGZ]
- Circular Grooved
- Material [MATT]
- Steel Corrosion Resisting
- Material Document And Classification [MDCL]
- Aisi 303 Assn Std Single Material Response
- Second End Distance From End To Groove [AMFQ]
- 0.578 Inches Nominal
- Second End Diameter [AMFZ]
- 0.1250 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.0950 Inches Nominal
- Second End Groove Width [AAHW]
- 0.0180 Inches Nominal
- Second End Style [AAHP]
- Circular Grooved
- Overall Length [ABHP]
- 2.453 Inches Nominal
- Surface Finish [CSYM]
- 32.0 Microinches
DLA Procurement Analysis 3040-00-840-1079
Management Data 3040-00-840-1079
NATO Stock Numbers Related to 3040-00-840-1079
Freight Information 3040-00-840-1079
3040-00-840-1079 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-840-1079 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-840-1079 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-840-1079 is not classified as a special type of cargo when transported by water. 3040-00-840-1079 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-840-1079 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: