Premium Information is available for this item - Upgrade for $1 a day
3040-00-795-5141
Shouldered Shaft
3040007955141 007955141 3-54458-3
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
19
Marketplace 3040-00-795-5141
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-795-5141 4+ Documents (More...)
United States (US) 4. 3040-00-795-5141 Marketplace Restrictions Approved Sources Datasheet Management
2 EA NS Request Quotation Updated Every Day 3040-00-795-5141 RQST NE Updated Every Day 3040-00-795-5141
Shouldered Shaft 3040007955141 007955141 for $1 a day Upgrade your Account Upgrade 3040-00-795-
5141Shouldered Shaft3040007955141 007955141 3-54458 //www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-795
Shouldered Shaft 3040007955141 007955141 for $1 a day Upgrade your Account Upgrade 3040-00-795-
5141Shouldered Shaft3040007955141 007955141 3-54458 //www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-795
Shouldered Shaft 3040007955141 007955141 for $1 a day Upgrade your Account Upgrade 3040-00-795-
5141Shouldered Shaft3040007955141 007955141 3-54458 //www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-795
Restrictions 3040-00-795-5141
3040-00-795-5141 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-795-5141
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-795-5141
- US Air Force (FUGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FUAX
- Spain (YB01)
- Effective Date:
- 1 Feb 1994
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 3040-00-795-5141
- Part Number
- Manufacturer
- Status
- 3-54458-3
- Manufacturer
- 76823 - Northrop Grumman Systems Corporation (Active)
- Original Design
- Original Design
- 3-54458-3
- 0JRC1 - Northrop Grumman Technical Services, (Active)
- Advisory Reference
- Advisory Reference
Datasheet 3040-00-795-5141
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- T-38 Aircraft
- End Similarity [AAHN]
- Identical
- First End Diameter [AMDL]
- 0.1950 Inches Nominal
- First End External Thread Length [AMEA]
- 0.2630 Inches Nominal
- First End Groove Diameter [AAHH]
- 0.1420 Inches Nominal
- First End Groove Width [AAHG]
- 0.0620 Inches Nominal
- First End Distance From End To Groove [AMCY]
- 0.2630 Inches Nominal
- First End Style [AAGZ]
- Circular Grooved And Externally Threaded
- Material Document And Classification [MDCL]
- Mil-S-7720 Mil Spec Single Material Response
- Material [MATT]
- Steel Comp 303
- Largest Step Diameter [CSPY]
- 0.2490 Inches Nominal
- Overall Length [ABHP]
- 1.2500 Inches Nominal
- Special Features [FEAT]
- Optional Center Drill Both Ends
- Step Quantity [ATPC]
- 4
- Surface Finish [CSYM]
- 125.0 Microinches
Weapon Systems (WSDC) 3040-00-795-5141
DLA Procurement Analysis 3040-00-795-5141
- Last Stock Position:
- 19 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-00-795-5141
Similar Supply Items to 3040-00-795-5141
Freight Information 3040-00-795-5141
3040-00-795-5141 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-795-5141 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-795-5141 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-795-5141 is not classified as a special type of cargo when transported by water. 3040-00-795-5141 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-795-5141
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Contracting Technical Data File (CTDF) 3040-00-795-5141 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: