Premium Information is available for this item - Upgrade for $1 a day
3040-00-769-2820
Straight Shaft
3040007692820 007692820 49459
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
May 2023
3
Marketplace 3040-00-769-2820
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-769-2820 5+ Documents (More...)
Straight Shaft 3040007692820 007692820,49459 RQST NE Updated Every Day 3040-00-769-2820 RQST Updated
Every Day 3040-00-769-2820 RQST NE Related Documents 3040-00-769-2820 5+ Documents ( More... ) https
Straight Shaft 3040007692820 007692820,49459 Ventola Speciale 2930150628837150628837 enable JavaScript
/fsg-29/fsc-2930/it 2930-15-062-8837 Ventola Speciale 2930150628837150628837 0-49459 Straight Shaft
//www.nsnlookup.com /fsg-53/fsc-5305/uk 5305-99-657-4459 Socket Head Cap Screw 5305996574459,49459 49459
enable JavaScript in your web browser . 2930-15-062-8837Ventola Speciale2930150628837 150628837 0-49459
Straight Shaft 3040007692820 007692820,49459 enable JavaScript in your web browser . 2930-15-062
-8837Ventola Speciale2930150628837 150628837 0-49459 //www.nsnlookup.com /fsg-29/fsc-2930/it 2930-15-
enable JavaScript in your web browser . 2930-15-062-8837Ventola Speciale2930150628837 150628837 0-49459
//www.nsnlookup.com /fsg-29/fsc-2930/it 2930-15-062-8837 Ventola Speciale 2930150628837150628837 0-49459
Restrictions 3040-00-769-2820
3040-00-769-2820 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-769-2820
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-769-2820
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
- Brazil (YA01)
- Effective Date:
- 1 Dec 2001
Approved Sources 3040-00-769-2820
- Part Number
- Manufacturer
- Status
- 49459
- Manufacturer
- 82340 - L3harris Technologies, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-00-769-2820
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.1870 Inches Nominal
- First End Style [AAGZ]
- Plain
- Material [MATT]
- Steel Corrosion Resisting
- Second End Distance From End To Groove [AMFQ]
- 0.281 Inches Nominal
- Second End Diameter [AMFZ]
- 0.1870 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.1760 Inches Nominal
- Second End Groove Width [AAHW]
- 0.0180 Inches Nominal
- Second End Style [AAHP]
- Circular Grooved
- Overall Length [ABHP]
- 1.703 Inches Nominal
- Surface Finish [CSYM]
- 8.0 Microinches
DLA Procurement Analysis 3040-00-769-2820
Management Data 3040-00-769-2820
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-00-769-2820
Freight Information 3040-00-769-2820
3040-00-769-2820 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-769-2820 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-769-2820 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-769-2820 is not classified as a special type of cargo when transported by water. 3040-00-769-2820 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-769-2820
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 3040-00-769-2820 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: