Premium Information is available for this item - Upgrade for $1 a day
3040-00-764-7906
Shouldered Shaft
3040007647906 007647906 176540
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
5
Marketplace 3040-00-764-7906
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-764-7906 5+ Documents (More...)
FedMall Updated Every Day 3040-00-764-7906 RQST NE Updated Every Day 3040-00-764-7906 RQST Updated Every
Day 3040-00-764-7906 RQST NE Related Documents 3040-00-764-7906 5+ Documents ( More... ) https//www.nsnlookup.com
for $1 a day Upgrade your Account Upgrade 3040-00-764-7906Shouldered Shaft3040007647906 007647906 176540
for $1 a day Upgrade your Account Upgrade 3040-00-764-7906Shouldered Shaft3040007647906 007647906 176540
Shouldered Shaft 3040007647906 007647906 for $1 a day Upgrade your Account Upgrade 3040-00-764-
7906Shouldered Shaft3040007647906 007647906 176540 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-
for $1 a day Upgrade your Account Upgrade 3040-00-764-7906Shouldered Shaft3040007647906 007647906 176540
Shouldered Shaft 3040007647906 007647906 for $1 a day Upgrade your Account Upgrade 3040-00-764-
web browser . 4130-14-382-8829Air Conditioning Filter Element4130143828829 143828829 352202070941 176540
for $1 a day Upgrade your Account Upgrade 5815-00-925-7321Module Assembly5815009257321 009257321 176540
Restrictions 3040-00-764-7906
3040-00-764-7906 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a US Munitions List Item and must be mutilated to scrap. This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-764-7906
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-764-7906
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Supplementary Collaborators:
- HD
- United States of America (ZZ)
Approved Sources 3040-00-764-7906
- Part Number
- Manufacturer
- Status
- 176540
- Manufacturer
- 71791 - Curtiss-Wright Controls, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-00-764-7906
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 2.5000 Inches Nominal
- First End Spline Length [AMDM]
- 0.6000 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 2.5000 Inches Nominal
- First End Spline Minor Diameter [AMDN]
- 2.3750 Inches Nominal
- First End Spline Quantity [BDSQ]
- 25
- First End Style [AAGZ]
- Splined (Involute)
- First End Pitch Diameter [AMDS]
- 2.4370 Inches Nominal
- First End Pressure Angle [AMDR]
- 30.0000 Degrees Nominal
- Fsc Application Data [ZZZV]
- Winch Assembly Aircraft
- Material [MATT]
- Steel
- Largest Step Diameter [CSPY]
- 2.525 Inches Nominal
- Second End Diameter [AMFZ]
- 2.5000 Inches Nominal
- Second End Pitch Diameter [AMGF]
- 2.4370 Inches Nominal
- Second End Pressure Angle [AMGE]
- 30.0000 Degrees Nominal
- Second End Spline Length [AMGA]
- 0.6400 Inches Nominal
- Second End Spline Major Diameter [AMGC]
- 2.5000 Inches Nominal
- Second End Spline Minor Diameter [AMGB]
- 2.3750 Inches Nominal
- Second End Spline Quantity [BDSR]
- 25
- Second End Style [AAHP]
- Splined (Involute)
- Overall Length [ABHP]
- 3.170 Inches Nominal
- Step Quantity [ATPC]
- 3
- Surface Finish [CSYM]
- 125.0 Microinches
Weapon Systems (WSDC) 3040-00-764-7906
DLA Procurement Analysis 3040-00-764-7906
Management Data 3040-00-764-7906
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-00-764-7906
Freight Information 3040-00-764-7906
3040-00-764-7906 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-764-7906 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-764-7906 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-764-7906 is not classified as a special type of cargo when transported by water. 3040-00-764-7906 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-764-7906 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: