Premium Information is available for this item - Upgrade for $1 a day
3040-00-761-9715
Straight Shaft
3040007619715 007619715 3-76524-5 3-76524
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
September 2023
7
Marketplace 3040-00-761-9715
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-761-9715 5+ Documents (More...)
Straight Shaft 3040007619715 007619715 for $1 a day Upgrade your Account Upgrade 3040-00-761-9715Straight
Shaft3040007619715 007619715 3-76524 -5 3-76524 A straight shaft having two or more of the following
Straight Shaft 3040007619715 007619715 for $1 a day Upgrade your Account Upgrade 3040-00-761-9715Straight
Shaft3040007619715 007619715 3-76524 -5 3-76524 A straight shaft having two or more of the following
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 3-76524
-3 CLAMP,HOLDER 40 EA NS Request Quotation Subscribe to View Vendor Details... 3-76524-3 CLAMP,HOLDER
... 1730-00-761-9716 BLOCK,HOLDER 100 EA NS Request Quotation Subscribe to View Vendor Details... 3-76524
76524-7 76823 - Northrop Grumman Systems Corporation (Active) Original Design RNCC 3 RNVC 9 DAC X 3-76524
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 3-76524
-9 HANDLE,LATCH DOG 2 EA NS Request Quotation Subscribe to View Vendor Details... 3-76524-9 HANDLE,LATCH
Restrictions 3040-00-761-9715
3040-00-761-9715 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-761-9715
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-761-9715
- US Air Force (FXGC)
- Effective Date:
- 1 Feb 2007
Approved Sources 3040-00-761-9715
- Part Number
- Manufacturer
- Status
- 3-76524-5
- Manufacturer
- 76823 - Northrop Grumman Systems Corporation (Active)
- Primary Buy
- Primary Buy
- 3-76524-5
- 0JRC1 - Northrop Grumman Technical Services, (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 3-76524-5
- 79U29 - Northrop Grumman Systems Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 3-76524
- 76823 - Northrop Grumman Systems Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-00-761-9715
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.5000 Inches Nominal
- First End Style [AAGZ]
- Plain
- Material [MATT]
- Steel
- Second End Diameter [AMFZ]
- 0.5000 Inches Nominal
- Second End External Thread Length [AMHA]
- 1.400 Inches Nominal
- Second End Style [AAHP]
- External Threaded
- Overall Length [ABHP]
- 3.870 Inches Nominal
Weapon Systems (WSDC) 3040-00-761-9715
DLA Procurement Analysis 3040-00-761-9715
Management Data 3040-00-761-9715
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Mar 2023
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2022
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Defense Logistics Agency (DS)
- I
- X
- Formerly 1730
- X
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3040-00-761-9715
Freight Information 3040-00-761-9715
3040-00-761-9715 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-761-9715 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-761-9715 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-761-9715 is not classified as a special type of cargo when transported by water. 3040-00-761-9715 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-761-9715
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 3.5" H x 1.3" W x 1.3" L
- --
- --
- Physical Protection
- Any Suitable Process
- 3.5" H x 1.3" W x 1.3" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
Procurement History 3040-00-761-9715 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE7L323P7365
- 24 Aug 2023
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPE7L323P6419
- 13 Jul 2023
- Subscribe
- 2
- Subscribe
- Subscribe
- Subscribe
- SPE7L323P6425
- 13 Jul 2023
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPE7L323P6373
- 12 Jul 2023
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPE7L317P2889
- 06 Feb 2017
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 3040-00-761-9715 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: