Premium Information is available for this item - Upgrade for $1 a day
3040-00-737-4998
Shouldered Shaft
3040007374998 007374998 640390 7374998 T90A2 T90A2E
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
January 2023
22
Marketplace 3040-00-737-4998
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-737-4998 4+ Documents (More...)
(Identification) 1/2 NSN 3040-00-737-4998 (Identification) 2/2 - - 1.
United States (US) 4. 3040-00-737-4998 Marketplace Restrictions Approved Sources Datasheet Management
/www.nsnlookup.com /fsg-25/fsc-2520/us 2520-00-025-6517 Transmis Clutch Hub 2520000256517000256517 T90A2
Documents 2520-00-025-6517 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-737-4998
www.nsnlookup.com /fsg-43/fsc-4320/us 4320-01-512-4120 Spring Loaded Shaft Seal Assembly 015124120 640390
www.nsnlookup.com /fsg-43/fsc-4320/us 4320-01-512-4120 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-737-4998
/fsg-43/fsc-4310/uk
4040Intake Muffler4310997764040 997764040AIS.8/27HH6461 /D0/010 ITEM 6 HH6461-05-019HH6461/D0/010/640390
4040Intake Muffler4310997764040 997764040AIS.8/27HH6461 /D0/010 ITEM 6 HH6461-05-019HH6461/D0/010/640390
Restrictions 3040-00-737-4998
3040-00-737-4998 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-737-4998
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-737-4998
- Austria (WB01)
- Effective Date:
- 1 Feb 2005
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 3040-00-737-4998
- Part Number
- Manufacturer
- Status
- T90A2
- Manufacturer
- 79410 - Liberty Ventures Inti, Llc (Active)
- Original Design
- Original Design
- 640390
- 34623 - Am General Llc (Active)
- Secondary Buy
- Secondary Buy
- 7374998
- 19207 - U S Army Tank Automotive Command (Active)
- Secondary Buy
- Secondary Buy
- T90A2E
- 79410 - Liberty Ventures Inti, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-00-737-4998
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.7690 Inches Nominal
- First End Style [AAGZ]
- Plain
- Material [MATT]
- Steel
- Largest Step Diameter [CSPY]
- 1.642 Inches Nominal
- Second End Diameter [AMFZ]
- 0.8750 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 0.188 Inches Nominal
- Second End External Thread Length [AMHA]
- 0.750 Inches Nominal
- Second End Hole Depth [AMHD]
- 0.875 Inches Nominal
- Second End Hole Diameter [AMGS]
- 0.1560 Inches Nominal
- Second End Style [AAHP]
- Cross Drilled And Externally Threaded
- Overall Length [ABHP]
- 10.276 Inches Nominal
- Step Quantity [ATPC]
- 5
Similar Supply Items to 3040-00-737-4998
Freight Information 3040-00-737-4998
3040-00-737-4998 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-737-4998 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-737-4998 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 590 for ocean manifesting and military sealift. 3040-00-737-4998 is not classified as a special type of cargo when transported by water. 3040-00-737-4998 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-737-4998
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- 10.0" H x 4.0" W x 4.0" L
- --
- --
- Preservative Coating Only
- Any Suitable Process
- 10.0" H x 4.0" W x 4.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --