Premium Information is available for this item - Upgrade for $1 a day
3040-00-737-1192
Straight Shaft
3040007371192 007371192 6002-617 1510 01510
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
May 2023
13
Marketplace 3040-00-737-1192
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-737-1192 5+ Documents (More...)
/fsg-30/fsc-3040/us
Vendor Details... 1510 SHAFT,STRAIGHT 12 EA NS Request Quotation Updated Every Day 3040-00-737-1192
RQST NE Updated Every Day 3040-00-737-1192 RQST Updated Every Day 3040-00-737-1192 RQST NE Related Documents
65/fsc-6505/it 6505-15-055-0216 6505-12-303-3910 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-737-1192
Straight Shaft 3040007371192 007371192 a day Upgrade your Account Upgrade 3040-00-737-1192Straight
Day 5355-15-100-1510 RQST NE Related Documents 5355-15-100-1510 5+ Documents ( More... ) https//www.nsnlookup.com
/fsc-5355/it 5355-15-100-1510 contact RQST NE Updated Every Day 5355-15-100-1510 RQST Updated Every Day
Knob 5355151001510 RQST NE Updated Every Day 5355-15-100-1510 RQST Updated Every Day 5355-15-100-1510
3040007371192 007371192 a day Upgrade your Account Upgrade 3040-00-737-1192Straight Shaft3040007371192
21-1510 An externally threaded fastener designed for insertion into holes in assembled parts, for mating
-000 SCREW,CAP,HEXAGON HEAD 50 EA NS Request Quotation Subscribe to View Vendor Details... 021-01510
Restrictions 3040-00-737-1192
3040-00-737-1192 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-00-737-1192
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-737-1192
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDKE
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 3040-00-737-1192
- Part Number
- Manufacturer
- Status
- 1510
- Manufacturer
- 26344 - New Haven Mfg Corp (Obsolete)
- Original Design
- Original Design
- 6002-617
- 05869 - Raytheon Company (Active)
- Secondary Buy
- Secondary Buy
- 01510
- 26344 - New Haven Mfg Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-00-737-1192
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Comp 17-4Ph
- Material Document And Classification [MDCL]
- Mil-C-24111,Type 17-4 Ph Cres Mil Spec Single Material Response
- Overall Length [ABHP]
- 4.625 Inches Nominal
- End Item Identification [AGAV]
- 5815-00-790-8780,Teletypewriter,Set,An/Tgc-29(V)3
DLA Procurement Analysis 3040-00-737-1192
Management Data 3040-00-737-1192
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Mar 2023
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Department of the Navy (DN)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Department of the Navy (DN)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Navy (DN)
- EA
- Subscribe
- 1
- EA
- Nov 2007
- US Marine Corps (DM)
- EA
- Subscribe
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Department of the Navy (DN)
- N
- X
- Formerly 5815
- X
- Defense Logistics Agency (DS)
- I
- X
- Formerly 5815
- X
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 2
- Non-Critical Repair Part
- Echelon Management:
- C2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
Similar Supply Items to 3040-00-737-1192
Freight Information 3040-00-737-1192
3040-00-737-1192 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-737-1192 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-737-1192 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-737-1192 is not classified as a special type of cargo when transported by water. 3040-00-737-1192 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-737-1192 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Y
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: