Premium Information is available for this item - Upgrade for $1 a day
3040-00-734-6892
Shouldered Shaft
3040007346892 007346892 3880M533 7346892 314285 KC5291
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
50
Marketplace 3040-00-734-6892
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-734-6892 4+ Documents (More...)
United States (US) 4. 3040-00-734-6892 Marketplace Restrictions Approved Sources Datasheet Management
RQST NE Updated Every Day 3040-00-734-6892 RQST NE Updated Every Day 3040-00-734-6892 RQST Updated Every
-10 KEEPER,AIR DUCT 38 EA NS Request Quotation Subscribe to View Vendor Details... 7346892-10 KEEPER,
AIR DUCT 7 EA NS Request Quotation Subscribe to View Vendor Details... 7346892-10 KEEPER,AIR DUCT 1 EA
Account Upgrade 6830-01-625-8226Technical Hydrogen Sulfide6830016258226 016258226 2AL 10PPM H2S/N2 314285
a day Upgrade your Account Upgrade 6750-01-427 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-734-6892
for $1 a day Upgrade your Account Upgrade 6750-01-427-3233Photographic Film6750014273233 014273233 314285
RNCC 3 RNVC 2 DAC 3 2A-H2SN05-C4 4AJK6 - Calgaz Llc (Active) Original Design RNCC 3 RNVC 9 DAC 4 314285
Restrictions 3040-00-734-6892
3040-00-734-6892 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-734-6892
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-734-6892
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZBD
- US Marine Corps (MC40)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- MC01
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
- Austria (WB01)
- Effective Date:
- 1 Feb 2005
- Spain (YB01)
- Effective Date:
- 1 Sep 2004
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Kuwait (YK01)
- Effective Date:
- 1 Feb 2015
- Morocco (YP01)
- Effective Date:
- 1 Nov 2008
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Jul 1995
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 3040-00-734-6892
- Part Number
- Manufacturer
- Status
- 3880M533
- Manufacturer
- 78500 - Meritor Heavy Vehicle Systems, Llc (Active)
- Primary Buy
- Primary Buy
- 7346892
- 19207 - U S Army Tank Automotive Command (Active)
- Secondary Buy
- Secondary Buy
- 314285
- H0001 - Daf Trucks N.V. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 3040007346892
- SCY13 - E.C.A Etablissement (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- KC5291
- 56442 - Diamond Reo Truck Co (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 3040007346892
- A00AM - E.C.A Etablissement Central Des (Active)
- NATO Reference
- NATO Reference
Datasheet 3040-00-734-6892
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Identical
- First End Angle Between Holes [CWFJ]
- 90.0 Degrees Nominal
- First End External Thread Length [AMEA]
- 1.000 Inches Nominal
- First End Hole Diameter [AMDX]
- 0.1563 Inches Nominal
- First End Diameter [AMDL]
- 1.5000 Inches Nominal
- First End Distance From Hole Center To End [AMDZ]
- 0.250 Inches Nominal
- First End Style [AAGZ]
- Two Cross Drilled Holes And Externally Threaded
- Material Document And Classification [MDCL]
- Qq-S-624 Fed Spec All Material Responses
- Material [MATT]
- Steel Comp 4140 Or Steel Comp 4145 Or Steel Comp 8640
- Largest Step Diameter [CSPY]
- 2.688 Inches Nominal
- Overall Length [ABHP]
- 22.438 Inches Nominal
- Step Quantity [ATPC]
- 8
- Surface Finish [CSYM]
- 63.0 Microinches
Weapon Systems (WSDC) 3040-00-734-6892
DLA Procurement Analysis 3040-00-734-6892
- Last Stock Position:
- 9 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-00-734-6892
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 3040-00-734-6892
Freight Information 3040-00-734-6892
3040-00-734-6892 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-734-6892 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-734-6892 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-734-6892 is not classified as a special type of cargo when transported by water. 3040-00-734-6892 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-734-6892
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- MIL-PRF-121, Type I, Medium Duty, Greaseproof, Waterproof Barrier
- --
- --
- ASTM - D5118, Fiberboard Box
- No special marking
- MIL-PRF-121, Type I, Medium Duty, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --
- No Requirement
Contracting Technical Data File (CTDF) 3040-00-734-6892 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: