Premium Information is available for this item - Upgrade for $1 a day
3040-00-728-1681
Shouldered Shaft
3040007281681 007281681 164743
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
12
Marketplace 3040-00-728-1681
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-728-1681 5+ Documents (More...)
United States (US) 4. 3040-00-728-1681 Marketplace Restrictions Approved Sources Datasheet Management
RQST NE Updated Every Day 3040-00-728-1681 RQST Updated Every Day 3040-00-728-1681 RQST NE Related Documents
www.nsnlookup.com /fsg-59/fsc-5930/fr 5930-14-399-2565 Push Switch 5930143992565 143992565,164743 164743
164743 www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-728-1681 https//www.nsnlookup.com /fsg-59/fsc-5998
a day Upgrade your Account Upgrade 5998-01-498 -0552Circuit Card Assembly5998014980552 014980552 164743
164743 www.nsnlookup.com /fsg-30/fsc-3040/us https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-728
Account Upgrade 5995-01-300-0826Electrical Special Purpose Cable Assembly5995013000826 013000826 09-164743
Account Upgrade 5995-01-300-0826Electrical Special Purpose Cable Assembly5995013000826 013000826 09-164743
www.nsnlookup.com /fsg-58/fsc-5820/uk 5820-99-418-1276 Frequency Divider 5820994181276994181276 233200625-164743
JavaScript in your web browser . 5820-99-418-1276Frequency Divider5820994181276 994181276233200625-164743
Restrictions 3040-00-728-1681
3040-00-728-1681 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-728-1681
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-728-1681
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Italy (ZR01)
- Effective Date:
- 1 Jul 1997
Approved Sources 3040-00-728-1681
- Part Number
- Manufacturer
- Status
- 164743
- Manufacturer
- 57712 - Telemechanics Inc (Active)
- Primary Buy
- Primary Buy
- 164743
- 70408 - At And T Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-00-728-1681
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.1120 Inches Nominal
- First End Groove Diameter [AAHH]
- 0.0740 Inches Nominal
- First End Distance From End To Groove [AMCY]
- 0.060 Inches Nominal
- First End Style [AAGZ]
- Circular Grooved
- Material [MATT]
- Steel
- Largest Step Diameter [CSPY]
- 0.156 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 0.045 Inches Nominal
- Second End Diameter [AMFZ]
- 0.1120 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.0820 Inches Nominal
- Second End Groove Width [AAHW]
- 0.0300 Inches Nominal
- Second End Style [AAHP]
- Circular Grooved
- Overall Length [ABHP]
- 0.875 Inches Nominal
- Step Quantity [ATPC]
- 3
DLA Procurement Analysis 3040-00-728-1681
Management Data 3040-00-728-1681
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-00-728-1681
Freight Information 3040-00-728-1681
3040-00-728-1681 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-728-1681 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-728-1681 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-728-1681 is not classified as a special type of cargo when transported by water. 3040-00-728-1681 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-728-1681 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: