Premium Information is available for this item - Upgrade for $1 a day
3040-00-652-4286
Shouldered Shaft
3040006524286 006524286 69B25209-1 30342
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-00-652-4286
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-652-4286 5+ Documents (More...)
(Identification) 1/2 NSN 3040-00-652-4286 (Identification) 2/2 - - 1.
BUY NE FedMall Updated Every Day 3040-00-652-4286 RQST NE Updated Every Day 3040-00-652-4286 RQST
Electrical Rotating Equipment Housing,30342 Rotating Equipment Housing6115144358711 144358711 https
//www.nsnlookup.com /fsg-61/fsc-6115/fr 6115-14-435-8711 Electrical Rotating Equipment Housing,30342
30342 Electrical Rotating Equipment Housing,30342 515-1253 Part NumberManufacturerStatus984-30342 https
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-652-4286 Shouldered Shaft 3040006524286 006524286
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-652-4286 Shouldered Shaft 3040006524286 006524286
day Upgrade your Account Upgrade 3040-00-652-4286Shouldered Shaft3040006524286 006524286 69B25209-1
SHAFT,SHOULDERED RQST NS Request Quotation Subscribe to View Vendor Details... 30342 SHAFT,SHOULDERED
Electrical Rotating Equipment Housing,30342 Rotating Equipment Housing6115144358711 144358711 https
Restrictions 3040-00-652-4286
3040-00-652-4286 is a Shouldered Shaft that does not have a nuclear hardened feature, but does have another critical feature or features such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-00-652-4286
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-652-4286
- National Security Agency (DGX1)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- DAX1
- Supplementary Receivers:
- AX
Approved Sources 3040-00-652-4286
- Part Number
- Manufacturer
- Status
- 69B25209-1
- Manufacturer
- 98748 - Air Force United States Department (Active)
- Primary Buy
- Primary Buy
- 30342
- 92755 - Northrop Grumman Systems Corp (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-00-652-4286
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Criticality Code Justification [CRTL]
- Aahg And Aahh And Amdl And Amfz And Amhl
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.3148 Inches Minimum And 0.3151 Inches Maximum
- First End Groove Diameter [AAHH]
- 0.2880 Inches Minimum And 0.2920 Inches Maximum
- First End Groove Width [AAHG]
- 0.0280 Inches Minimum And 0.0310 Inches Maximum
- First End Distance From End To Groove [AMCY]
- 0.355 Inches Nominal
- First End Style [AAGZ]
- Circular Grooved
- Fsc Application Data [ZZZV]
- Radio Navigation Equipment Nonairborne,Antrn17
- Material [MATT]
- Steel Corrosion Resisting
- Largest Step Diameter [CSPY]
- 0.343 Inches Nominal
- Second End Diameter [AMFZ]
- 0.2880 Inches Minimum And 0.2920 Inches Maximum
- Second End Distance From Bearing Seat To End [AMHM]
- 0.343 Inches Nominal
- Second End Bearing Seat Diameter [AMHL]
- 0.3148 Inches Minimum And 0.3151 Inches Maximum
- Second End Bearing Seat Length [AMHK]
- 0.343 Inches Nominal
- Second End Style [AAHP]
- Bearing Seat
- Overall Length [ABHP]
- 8.187 Inches Nominal
- Step Quantity [ATPC]
- 11
DLA Procurement Analysis 3040-00-652-4286
Management Data 3040-00-652-4286
Similar Supply Items to 3040-00-652-4286
Freight Information 3040-00-652-4286
3040-00-652-4286 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-652-4286 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-652-4286 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-652-4286 is not classified as a special type of cargo when transported by water. 3040-00-652-4286 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-652-4286 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: