Premium Information is available for this item - Upgrade for $1 a day
3040-00-611-7558
Remote Control Lever
3040006117558 006117558 26-2413
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL. View more Remote Control Lever
November 2023
4
Marketplace 3040-00-611-7558
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-611-7558 1+ Documents (More...)
Every Day 3040-00-611-7558 RQST NE Related Documents 3040-00-611-7558 1+ Documents ( More... ) https
FedMall Updated Every Day 3040-00-611-7558 RQST NE Updated Every Day 3040-00-611-7558 RQST Updated Every
Restrictions 3040-00-611-7558
3040-00-611-7558 is a Remote Control Lever that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 3040-00-611-7558
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
Approved Sources 3040-00-611-7558
- Part Number
- Manufacturer
- Status
- 26-2413
- Manufacturer
- 82918 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-00-611-7558
- Characteristic
- Specifications
- FIIG
- Specifications
- A524P0
- Bore Diameter [ABXV]
- 0.625 Inches Nominal
- Bore Length [ADGE]
- 0.690 Inches Nominal
- Bore Type [ASBP]
- Plain Straight
- Center To Center Distance Between Link And Shaft Holes [BFGW]
- 1.750 Inches Nominal
- Material Document And Classification [MDCL]
- Mil-S-7658 Mil Spec Single Material Response
- Material [MATT]
- Steel
- Link End Hole Diameter [BFHA]
- 0.189 Inches Minimum And 0.192 Inches Maximum
- Link End Thickness [BFGY]
- 0.360 Inches Nominal
- Shaft End Thickness [BFGX]
- 0.690 Inches Nominal
- Overall Width [ABMK]
- 0.880 Inches Nominal
- Special Features [FEAT]
- Offset Height: 0.330 In. Nominal
- Style Designator [STYL]
- One Hole Tongue Link End, Securing Hole Shaft End
Weapon Systems (WSDC) 3040-00-611-7558
DLA Procurement Analysis 3040-00-611-7558
- Last Stock Position:
- 10 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-00-611-7558
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Mar 2023
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2022
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Nov 2021
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Defense Logistics Agency (DS)
- I
- X
- Formerly 1560
- X
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- FG
- B-52 STRATO FORTRESS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3040-00-611-7558
Freight Information 3040-00-611-7558
3040-00-611-7558 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 132330. A Sub NMFC of X. It has a NMFC Description of TRANSMISSIONS/CLUTCHES/PARTS,NOI. 3040-00-611-7558 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 64340 which rates the freight between FCL and LCL. 3040-00-611-7558 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-611-7558 is not classified as a special type of cargo when transported by water. 3040-00-611-7558 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Procurement History 3040-00-611-7558 2 Records
Contracting Technical Data File (CTDF) 3040-00-611-7558 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: