Premium Information is available for this item - Upgrade for $1 a day
3040-00-570-5237
Shouldered Shaft
3040005705237 005705237 545306
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
10
Marketplace 3040-00-570-5237
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-570-5237 1+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-00-570-5237 RQST NE Updated Every Day 3040-00-570-5237 RQST
Updated Every Day 3040-00-570-5237 RQST NE Related Documents 3040-00-570-5237 1+ Documents ( More...
Restrictions 3040-00-570-5237
3040-00-570-5237 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-570-5237
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-570-5237
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
Approved Sources 3040-00-570-5237
- Part Number
- Manufacturer
- Status
- 545306
- Manufacturer
- 73030 - Hamilton Sundstrand Corporation (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-00-570-5237
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.3400 Inches Minimum And 0.3420 Inches Maximum
- First End Style [AAGZ]
- Plain
- Material [MATT]
- Steel Corrosion Resisting
- Largest Step Diameter [CSPY]
- 0.340 Inches Minimum And 0.342 Inches Maximum
- Material Document And Classification [MDCL]
- Hs279,Cond 1075,Fscm 73030 Mfr Ref Single Material Response
- Second End Diameter [AMFZ]
- 0.3400 Inches Minimum And 0.3420 Inches Maximum
- Second End Spline Quantity [BDSR]
- 18
- Second End Style [AAHP]
- Splined (Involute)
- Second End Pitch Diameter [AMGF]
- 0.2375 Inches Nominal
- Second End Pressure Angle [AMGE]
- 45.0000 Degrees Nominal
- Second End Spline Length [AMGA]
- 0.030 Inches Nominal
- Second End Spline Major Diameter [AMGC]
- 0.2479 Inches Minimum And 0.2491 Inches Maximum
- Second End Spline Minor Diameter [AMGB]
- 0.2230 Inches Minimum And 0.2250 Inches Maximum
- Overall Length [ABHP]
- 3.420 Inches Nominal
- Step Quantity [ATPC]
- 8
DLA Procurement Analysis 3040-00-570-5237
Management Data 3040-00-570-5237
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Mar 2023
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2022
- Department of the Army (DA)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Department of the Army (DA)
- EA
- Subscribe
- 1
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Defense Logistics Agency (DS)
- I
- X
- Formerly 1660
- X
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 3040-00-570-5237
Freight Information 3040-00-570-5237
3040-00-570-5237 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-570-5237 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-570-5237 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-570-5237 is not classified as a special type of cargo when transported by water. 3040-00-570-5237 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-570-5237 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: