Premium Information is available for this item - Upgrade for $1 a day
3040-00-554-6200
Shouldered Shaft
3040005546200 005546200 MCF12267-1
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
January 2023
5
Marketplace 3040-00-554-6200
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-554-6200 1+ Documents (More...)
Restrictions 3040-00-554-6200
IUID Required
3040-00-554-6200 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-554-6200
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-554-6200
- US Air Force (FGG4)
- Effective Date:
- 1 Sep 2000
- Former MOE Rule:
- FEE4
Approved Sources 3040-00-554-6200
- Part Number
- Manufacturer
- Status
- MCF12267-1
- Manufacturer
- 76050 - Eaton Aerospace Llc (Active)
- Primary Buy
- Primary Buy
Datasheet 3040-00-554-6200
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Fsc Application Data [ZZZV]
- Test Stand,Hydraulic System Components,Acft
- Material [MATT]
- Steel Corrosion Resisting
- Overall Length [ABHP]
- 6.000 Inches Nominal
Management Data 3040-00-554-6200
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Dec 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
Air Force
- Budget:
- M
- 57X3080 - Other Base Maintenance and Support Equipment
- Aggregation Code:
- JX
- AIRCRAFT MAINTENANCE EQUIPMENT
- Price Validation Code:
- X
- The current standard price has been validated and the previous price was erroneous.
The item was overpriced and the contractor has refunded the overcharge or DoD activities did not actually pay the previous price. The price paid is within the analyzed acceptable range.
If the difference from the previous price exceeds $99.99 or if the price change exceeds 500 percent and the extended value of any affected transaction exceeds $99.99, then reverse-post procedures will apply where the stock fund has overcharged unit O&M Funds. These corrections will be limited to the current fiscal year.
ZOP or Standard Price challenges are permissible but should be supported by adequate justification.
- Expendability
Recoverability
Repairability: - U
- Reparable. Condemn at Intermediate. AF Equipment Management System (AFEMS).
NATO Stock Numbers Related to 3040-00-554-6200
Freight Information 3040-00-554-6200
3040-00-554-6200 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 132330. A Sub NMFC of X. It has a NMFC Description of TRANSMISSIONS/CLUTCHES/PARTS,NOI. 3040-00-554-6200 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. 3040-00-554-6200 is rated as class 65 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 64340 which rates the freight between FCL and LCL. 3040-00-554-6200 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-554-6200 is not classified as a special type of cargo when transported by water. 3040-00-554-6200 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-554-6200
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- A-A-3174, Plastic Sheet, Polyolefin, 2mil
- No Requirement
- Not Applicable
- --
- No special marking
- A-A-3174, Plastic Sheet, Polyolefin, 2mil
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- --