Premium Information is available for this item - Upgrade for $1 a day
3040-00-506-8539
Shouldered Shaft
3040005068539 005068539 7974519 M3001780
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
4
Marketplace 3040-00-506-8539
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-506-8539 3+ Documents (More...)
Restrictions 3040-00-506-8539
3040-00-506-8539 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-506-8539
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-506-8539
- National Security Agency (DGX1)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- DAX1
- Supplementary Receivers:
- AX
- Austria (WB01)
- Effective Date:
- 1 Feb 2005
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Jun 1994
Approved Sources 3040-00-506-8539
- Part Number
- Manufacturer
- Status
- 7974519
- Manufacturer
- 19207 - U S Army Tank Automotive Command (Active)
- Primary Buy
- Primary Buy
- M3001780
- 61465 - Garwood/Feller Inc Garwood Winch Div (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-00-506-8539
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- Material [MATT]
- Steel Comp 4140
- Material Document And Classification [MDCL]
- Qq-S-624 Fed Spec Single Material Response
- Surface Finish [CSYM]
- 16.0 Microinches
- First End Style [AAGZ]
- Plain
- First End Diameter [AMDL]
- 1.7719 Inches Nominal
- End Similarity [AAHN]
- Not Identical
- Second End Style [AAHP]
- Flat Keyways And Internally Threaded
- Second End Keyway Width [AMFR]
- 0.3125 Inches Nominal
- Second End External Keyway Length [AMFS]
- 1.430 Inches Nominal
- Second End Keyway Depth [AMFT]
- 0.177 Inches Nominal
- Second End Diameter [AMFZ]
- 1.2495 Inches Nominal
- Second End Internal Thread Length [AMHP]
- 1.000 Inches Nominal
- Largest Step Diameter [CSPY]
- 2.241 Inches Nominal
- Overall Length [ABHP]
- 18.437 Inches Nominal
- Step Quantity [ATPC]
- 5
- Special Features [FEAT]
- Second End Int Thd Hole Is First Tapped 1.500 In. Dp,0.453 In. Dia
DLA Procurement Analysis 3040-00-506-8539
Management Data 3040-00-506-8539
NATO Stock Numbers Related to 3040-00-506-8539
Freight Information 3040-00-506-8539
3040-00-506-8539 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-506-8539 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-506-8539 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-506-8539 is not classified as a special type of cargo when transported by water. 3040-00-506-8539 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-506-8539 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: