Premium Information is available for this item - Upgrade for $1 a day
3040-00-499-1750
Shouldered Shaft
3040004991750 004991750 567-8778-001 567-8778
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
January 2023
13
Marketplace 3040-00-499-1750
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-499-1750 4+ Documents (More...)
(greater than 0.031 inches (0.79 Day 5310-01-567-8778 RQST Updated Every Day 5310-01-567-8778 RQST NE
Restrictions 5310-01-567-8778 DEMIL Day 3020-00-567-8778 RQST NE Restrictions 3020-00-567-8778 DEMIL
3020-00-567-8778 Marketplace Restrictions Approved https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040
-00-499-1750 Shouldered Shaft 3040004991750 004991750 8778 RQST Updated Every Day 5310-01-567-8778 RQST
RQST Updated Every Day 6240-14-567-8778 RQST NE Related Documents 6240-14-567-8778 5+ Documents ( More
Shouldered Shaft 3040004991750 004991750 499-1750 Shouldered Shaft 3040004991750004991750 https
Every Day 5310-01-567-8778 RQST NE Related Documents 5310-01-567-8778 2+ Documents ( More... ) https
BUY NE FedMall Updated Every Day 5310-01-567-8778 RQST NE Updated Every Day 5310-01-567-8778 RQST https
Restrictions 3040-00-499-1750
3040-00-499-1750 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-499-1750
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-499-1750
- Spain (YB01)
- Effective Date:
- 1 May 1997
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3040-00-499-1750
- Part Number
- Manufacturer
- Status
- 567-8778-001
- Manufacturer
- 13499 - Rockwell Collins, Inc. (Active)
- Primary Buy
- Primary Buy
- 567-8778-001
- 04YE2 - Valcore Manufacturing Llc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 567-8778-001
- 20723 - Valcore Manufacturing Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 567-8778
- 13499 - Rockwell Collins, Inc. (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-00-499-1750
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.1246 Inches Minimum And 0.1250 Inches Maximum
- First End Style [AAGZ]
- Plain
- Material Document And Classification [MDCL]
- Qq-S-764,Cond A Fed Spec Single Material Response
- Material [MATT]
- Steel Comp 303
- Largest Step Diameter [CSPY]
- 0.312 Inches Nominal
- Second End Diameter [AMFZ]
- 0.2525 Inches Nominal
- Second End Slot Depth [AMGR]
- 0.050 Inches Nominal
- Second End Slot Width [AKTN]
- 0.045 Inches Minimum And 0.054 Inches Maximum
- Second End Style [AAHP]
- Slotted
- Overall Length [ABHP]
- 1.868 Inches Nominal
- Special Features [FEAT]
- Second End Flatted To 0.223 In. Dia; Has Detent Tooth In Slot
- Step Quantity [ATPC]
- 10
Similar Supply Items to 3040-00-499-1750
Freight Information 3040-00-499-1750
3040-00-499-1750 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-499-1750 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-499-1750 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-499-1750 is not classified as a special type of cargo when transported by water. 3040-00-499-1750 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-499-1750
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- --
- --
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- --
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- See Method of Preservation
- --