Premium Information is available for this item - Upgrade for $1 a day
3040-00-471-0261
Straight Shaft
3040004710261 004710261 121719
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE. View more Straight Shaft
May 2023
3
Marketplace 3040-00-471-0261
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-471-0261 5+ Documents (More...)
Updated Every Day 3040-00-471-0261 RQST NE Related Documents 3040-00-471-0261 5+ Documents ( More...
) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-471-0261 Straight Shaft 3040004710261 004710261,121719
to enable JavaScript in your web browser . 6605-14-227-2669Plaque Support6605142272669 142272669 121719
Account Upgrade 4720-01-655-5115Nonmetallic Tubing4720016555115 016555115 SAE-J844 3270-0616-0100 121719
to enable JavaScript in your web browser . 6605-14-227-2669Plaque Support6605142272669 142272669 121719
Account Upgrade 4720-01-655-5115Nonmetallic Tubing4720016555115 016555115 SAE-J844 3270-0616-0100 121719
enable JavaScript in your web browser . 7490-00-059 -4306Frame-Wiper Roll As7490000594306 000594306 121719
Straight Shaft 3040004710261 004710261,121719 123785488,121719 enable JavaScript in your web browser
to enable JavaScript in your web browser . 6605-14-227-2669Plaque Support6605142272669 142272669 121719
- Upgrade for $1 a day Upgrade your Account Upgrade 5330-01-240-8928Gasket5330012408928 012408928 121719
Restrictions 3040-00-471-0261
3040-00-471-0261 is a Straight Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-471-0261
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-471-0261
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- United States of America (ZZ)
Approved Sources 3040-00-471-0261
- Part Number
- Manufacturer
- Status
- 121719
- Manufacturer
- 77237 - Dana Off Highway Products, Llc (Active)
- Primary Buy
- Primary Buy
- 121719
- 12603 - Clark Equipment Co (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-00-471-0261
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 1.7500 Inches Nominal
- First End Style [AAGZ]
- Plain
- Material [MATT]
- Steel
- Second End Hole Depth [AMHD]
- 0.156 Inches Nominal
- Second End Hole Diameter [AMGS]
- 0.3906 Inches Nominal
- Second End Diameter [AMFZ]
- 1.7500 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 0.359 Inches Nominal
- Second End Style [AAHP]
- Unthreaded Cross Drilled
- Overall Length [ABHP]
- 4.688 Inches Nominal
- Surface Finish [CSYM]
- 15.0 Microinches
DLA Procurement Analysis 3040-00-471-0261
Management Data 3040-00-471-0261
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 3040-00-471-0261
Freight Information 3040-00-471-0261
3040-00-471-0261 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-471-0261 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-471-0261 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-471-0261 is not classified as a special type of cargo when transported by water. 3040-00-471-0261 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-471-0261 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: