Premium Information is available for this item - Upgrade for $1 a day
3040-00-454-9799
Shouldered Shaft
3040004549799 004549799 133836
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
3
Marketplace 3040-00-454-9799
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-454-9799 5+ Documents (More...)
BUY NE FedMall Updated Every Day 133836 RQST NE Updated Every Day 3040-00-454-9799 RQST NE Updated
Every Day 3040-00-454-9799 RQST Updated Every Day 3040-00-454-9799 RQST NE Related Documents 3040-00
2881 Hydraulic Pump 4320151622881 151622881,133836 6648Circuit Card Assembly5998219096648 219096648 133836
3040/us 3040-00-454-9799 Shouldered Shaft 3040004549799 004549799 Assembly5998219096648 https//www.nsnlookup.com
www.nsnlookup.com /fsg-59/fsc-5998/ca 5998-21-909-6648 Circuit Card Assembly 5998219096648219096648 133836
enable JavaScript in your web browser . 5998-21-909 -6648Circuit Card Assembly5998219096648 219096648 133836
www.nsnlookup.com /fsg-59/fsc-5998/ca 5998-21-909-6648 Circuit Card Assembly 5998219096648219096648 133836
Shouldered Shaft 3040004549799 004549799 for $1 a day Upgrade your Account Upgrade 3040-00-454-
www.nsnlookup.com /fsg-58/fsc-5895/us 5895-01-411-5585 Electronic Frequency Converter 5895014115585 190-133836
Shouldered Shaft 3040004549799 004549799 6648Circuit Card Assembly5998219096648 219096648 133836
Restrictions 3040-00-454-9799
3040-00-454-9799 is a Shouldered Shaft This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-454-9799
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-454-9799
- US Army (A920)
- Effective Date:
- 1 Aug 2006
- Former MOE Rule:
- A181
Approved Sources 3040-00-454-9799
- Part Number
- Manufacturer
- Status
- 133836
- Manufacturer
- 15434 - Cummins Inc. (Active)
- Primary Buy
- Primary Buy
DLA Procurement Analysis 3040-00-454-9799
Management Data 3040-00-454-9799
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Similar Supply Items to 3040-00-454-9799
Freight Information 3040-00-454-9799
3040-00-454-9799 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-454-9799 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-454-9799 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-454-9799 is not classified as a special type of cargo when transported by water. 3040-00-454-9799 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-454-9799
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- MIL-PRF-22019, Transparent Volatile Corrosion Inhibitor Treated Barrier Material
- --
- --
- --
- No special marking
- MIL-PRF-22019, Transparent Volatile Corrosion Inhibitor Treated Barrier Material
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3040-00-454-9799 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: