Premium Information is available for this item - Upgrade for $1 a day

3040-00-453-4464

Shouldered Shaft

3040004534464 004534464 13216E5266

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft

3040-00-453-4464 SHAFT,SHOULDERED 3040004534464 004534464

Managed by United States
NSN Created on 11 May 1970
Data Last Changed
May 2023
NATO Update Count
4
NATO Data Quality
3040-00-453-4464 SHAFT,SHOULDERED 3040004534464 004534464 1/1
NSN 3040-00-453-4464 (Generic Image) 1/1

3040-00-453-4464 Stock and Availability Marketplace 3040-00-453-4464

Need Help?
Request a Quotation from participating marketplace vendors
FedMallFedMall.mil Updated Every 15 Minutes
3040-00-453-4464 BUY NE FedMallFedMall.mil
eBay Updated Every Day
3040-00-453-4464 RQST NE eBay
eBay Updated Every Day
3040-00-453-4464 RQST eBay
Amazon Updated Every Day
3040-00-453-4464 RQST NE Amazon

3040-00-453-4464 Related Documents Related Documents 3040-00-453-4464 2+ Documents (More...)

Documents 4610-00-456-1058 2+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-453-4464
Shouldered Shaft 3040004534464 004534464 ( More... ) https//www.nsnlookup.com /cage Met-Pro Corporation
1 Jan 1963 4610-00-456-1058 L Calibration Chart B12556RNCC: 3 | RNVC: 2 | DAC: 5 23 Apr 1969 3040-00-453-4464

3040-00-453-4464 Demil Restrictions 3040-00-453-4464

DEMIL: A | DEMILI: | CRITICALITY: | HMIC: N | PMIC: U | EDC: | ADPEC:

3040-00-453-4464 is a Shouldered Shaft This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.

3040-00-453-4464 HTS and ScheduleB Import and Export 3040-00-453-4464

3040-00-453-4464 End Users End Users 3040-00-453-4464

US Army (A920)
Effective Date:
1 Jul 2005
Former MOE Rule:
A181
Supplementary Receivers:
AZ

3040-00-453-4464 Stock, Inventory and Procurement DLA Procurement Analysis 3040-00-453-4464

DLA Administrative Lead Time:
Subscribe
DLA Production Lead Time:
Subscribe
Subscribe to View DLA Inventory and Forecast...

3040-00-453-4464 Management Data Management Data 3040-00-453-4464

Effective Date
Organization
Unit of Issue
Unit Price
Qty Unit Pack
Oct 2022
Department of the Army (DA)
EA
Subscribe
1
Oct 2021
Defense Logistics Agency (DS)
EA
Subscribe
1
Oct 2020
Defense Logistics Agency (DS)
EA
Subscribe
1
Oct 2019
Department of the Army (DA)
EA
Subscribe
1

Army Army

Materiel Category and Inventory Manager:
J
Ground Forces Support Materiel (DLA/GSA Items)
Appropriation and Budget Activity:
2
Stock Fund Secondary Items
Management Inventory Segment:
2
Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
Weapons System / End Item / Homogeneous Group:
00
DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
Accounting Requirements:
X
Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.

3040-00-453-4464 Related Items NATO Stock Numbers Related to 3040-00-453-4464

3040-00-453-4464 Freight Data Freight Information 3040-00-453-4464

3040-00-453-4464 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-453-4464 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-453-4464 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-453-4464 is not classified as a special type of cargo when transported by water. 3040-00-453-4464 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.

3040-00-453-4464 Contracting Technical Data File (CTDF) Contracting Technical Data File (CTDF) 3040-00-453-4464 October 2021

Criticality and Quality

Critical Item Code:
Flight Safety:
Life Support:
Certified Samples:
Serialization:
First Article Test (FAT):
Certificate of Quality Compliance:
Production Lot Testing:
Special Testing:
Qualified Products List (QPL):

Commercial Properties

Government Furnished Material:
Government Furnished Tooling:
Government Furnished Property:
Price Evaluation Code:
Diminshing Manufacturing Sources:
Warranty:
Commerical Off The Shelf (COTS):
End Item Application:
Auctioning Candidate:
Source of Procurement:
Contract Option:

Restrictions

Boeing Rights Guard:
Export Controlled:
Controlled Technical Data Package (TDP):
Restricted Technical Data Package (TDP):
Contains Classified Material
Weapons System Indicator Code (WSIC):
N

Packaging Requirements

Packaging Determination Table:
Packaging Review Code:
Y
Special Packaging Instruction Number (SPIN):
Special Packaging Instruction Number Revision:
Special Packaging Instruction Number Date:
Pallet Reference Number Required: