Premium Information is available for this item - Upgrade for $1 a day
3040-00-406-4844
Shouldered Shaft
3040004064844 004064844 60476-1 60476
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
January 2023
5
Marketplace 3040-00-406-4844
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-406-4844 5+ Documents (More...)
Documents 6125-14-261-2464 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-406-4844
Shouldered Shaft 3040004064844 004064844 for $1 a day Upgrade your Account Upgrade 3040-00-406-
DAX1Supplementary Receivers:AX AMC 0 AMSC 0 Approved Sources 1720-00-315-8938 Part NumberManufacturerStatus11-60476
DAX1Supplementary Receivers:AX AMC 0 AMSC 0 Approved Sources 1720-00-315-8937 Part NumberManufacturerStatus11-60476
- Upgrade for $1 a day Upgrade your Account Upgrade 5360-00-534-2282Spring5360005342282 005342282 60476
60476 SPRING 8 EA NS Request Quotation Updated Every Day 5360-00-534-2282 RQST NE Updated Every Day
Restrictions 3040-00-406-4844
3040-00-406-4844 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-406-4844
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-406-4844
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 3040-00-406-4844
- Part Number
- Manufacturer
- Status
- 60476-1
- Manufacturer
- 9Y580 - L3harris Technologies, Inc. (Active)
- Primary Buy
- Primary Buy
- 60476-1
- 82340 - L3harris Technologies, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 60476
- 82340 - L3harris Technologies, Inc. (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3040-00-406-4844
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.4530 Inches Minimum And 0.4580 Inches Maximum
- First End External Thread Length [AMEA]
- 0.380 Inches Nominal
- First End Style [AAGZ]
- External Threaded
- Material Document And Classification [MDCL]
- Mil-S-7720,Cond A Mil Spec Single Material Response
- Material [MATT]
- Steel Comp 303
- Largest Step Diameter [CSPY]
- 0.560 Inches Nominal
- Second End Diameter [AMFZ]
- 0.2496 Inches Minimum And 0.2498 Inches Maximum
- Second End Distance From End To Groove [AMFQ]
- 0.007 Inches Minimum And 0.009 Inches Maximum
- Second End Groove Width [AAHW]
- 0.0290 Inches Minimum And 0.0320 Inches Maximum
- Second End Slot Depth [AMGR]
- 0.040 Inches Nominal
- Second End Slot Width [AKTN]
- 0.046 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.2290 Inches Minimum And 0.2310 Inches Maximum
- Second End Style [AAHP]
- Circular Grooved And Slotted
- Overall Length [ABHP]
- 1.560 Inches Nominal
- Special Features [FEAT]
- Shaft Is Eccentric
- Step Quantity [ATPC]
- 4
- Surface Finish [CSYM]
- 32.0 Microinches
NATO Stock Numbers Related to 3040-00-406-4844
Freight Information 3040-00-406-4844
3040-00-406-4844 has freight characteristics managed by the Office od the Secretary of HEW.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-406-4844 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-406-4844 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 590 for ocean manifesting and military sealift. 3040-00-406-4844 is not classified as a special type of cargo when transported by water. 3040-00-406-4844 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-406-4844
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box