Premium Information is available for this item - Upgrade for $1 a day
3040-00-400-0330
Shouldered Shaft
3040004000330 004000330 532154-11
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
7
Marketplace 3040-00-400-0330
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-400-0330 5+ Documents (More...)
BUY NE FedMall Updated Every Day 3040-00-400-0330 RQST NE Updated Every Day 3040-00-400-0330 RQST
Updated Every Day 3040-00-400-0330 RQST NE Related Documents 3040-00-400-0330 4+ Documents ( More...
www.nsnlookup.com /fsg-30/fsc-3020/us 3020-01-464-2826 Sprocket Wheel 3020014642826 014642826,532154 004000330
4710144094905 144094905 Supply Load Module5895010989445 010989445 0330Shouldered Shaft3040004000330 004000330
Shouldered Shaft 3040004000330 004000330 for $1 a day Upgrade your Account Upgrade 3040-00-400-
0330Shouldered Shaft3040004000330 004000330 532154 /us 5895-01-098-9445 5895010989445 010989445,532154
Shouldered Shaft 3040004000330 004000330 for $1 a day Upgrade your Account Upgrade 3040-00-400-
0330Shouldered Shaft3040004000330 004000330 532154 Metallic Bent Tube 4710144094905144094905 Supply Load
Restrictions 3040-00-400-0330
3040-00-400-0330 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a confirmed Commerce Control List Item (CCLI). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-400-0330
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-400-0330
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
Approved Sources 3040-00-400-0330
- Part Number
- Manufacturer
- Status
- 532154-11
- Manufacturer
- 45934 - Ontic Engineering & Manufacturing, (Active)
- Primary Buy
- Primary Buy
- 532154-11
- 70210 - Honeywell International Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 532154-11
- 0ZWK8 - Moog Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-00-400-0330
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Groove Width [AAHG]
- 0.6562 Inches Minimum And 0.6567 Inches Maximum
- First End Hole Diameter [AMDX]
- 0.2100 Inches Minimum And 0.2200 Inches Maximum
- First End Distance From End To Groove [AMCY]
- 1.190 Inches Nominal
- First End Distance From Hole Center To End [AMDZ]
- 0.182 Inches Minimum And 0.192 Inches Maximum
- First End External Thread Length [AMEA]
- 0.620 Inches Minimum And 0.680 Inches Maximum
- First End Spline Length [AMDM]
- 2.330 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 0.7972 Inches Minimum And 0.8022 Inches Maximum
- First End Spline Minor Diameter [AMDN]
- 0.7315 Inches Minimum And 0.7398 Inches Maximum
- First End Style [AAGZ]
- Circular Grooved
- Fsc Application Data [ZZZV]
- Actuator,Leading Edge Slat,Acft
- Material Document And Classification [MDCL]
- Mil-S-6709 Mil Spec Single Material Response
- Material [MATT]
- Steel
- Largest Step Diameter [CSPY]
- 1.040 Inches Minimum And 1.070 Inches Maximum
- Second End Hole Diameter [AMGS]
- 0.2100 Inches Minimum And 0.2200 Inches Maximum
- Second End Distance From Hole Center To End [AMGT]
- 0.182 Inches Minimum And 0.192 Inches Maximum
- Second End External Thread Length [AMHA]
- 0.620 Inches Minimum And 0.680 Inches Maximum
- Second End Spline Length [AMGA]
- 1.085 Inches Nominal
- Second End Spline Major Diameter [AMGC]
- 0.7972 Inches Minimum And 0.8022 Inches Maximum
- Second End Spline Minor Diameter [AMGB]
- 0.7318 Inches Minimum And 0.7398 Inches Maximum
- Second End Style [AAHP]
- Splined (Straight)
- Overall Length [ABHP]
- 7.320 Inches Nominal
- Surface Finish [CSYM]
- 32.0 Microinches
Weapon Systems (WSDC) 3040-00-400-0330
DLA Procurement Analysis 3040-00-400-0330
- Last Stock Position:
- 24 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-00-400-0330
Similar Supply Items to 3040-00-400-0330
Freight Information 3040-00-400-0330
3040-00-400-0330 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-400-0330 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-400-0330 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-400-0330 is not classified as a special type of cargo when transported by water. 3040-00-400-0330 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-400-0330
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- Vendor's Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Procurement History 3040-00-400-0330 1 Records
Contracting Technical Data File (CTDF) 3040-00-400-0330 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: