Premium Information is available for this item - Upgrade for $1 a day
3040-00-360-3906
Remote Control Lever
3040003603906 003603906 XB3388 A3470 1K3614 8-6155
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL. View more Remote Control Lever
November 2023
24
Marketplace 3040-00-360-3906
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-360-3906 5+ Documents (More...)
United States (US) 4. 3040-00-360-3906 Marketplace Restrictions Approved Sources Datasheet Management
3040-00-360-3906 RQST Updated Every Day 3040-00-360-3906 RQST NE Related Documents 3040-00-360-3906
-170 A3470-170-190 ECA3470 12743 An item designed to transmit the torque developed by a starting motor
//www.nsnlookup.com /fsg-29/fsc-2920/us 2920-00-306-0338 Electrical Starter Engine Drive 003060338 A3470
-1875 Part NumberManufacturerStatusB82422-A3470 https//www.nsnlookup.com /fsg-59/fsc-5950/de 5950-12
-00-542-1006 Preformed Packing 5330005421006 005421006 -1875 Part NumberManufacturerStatusB82422-A3470
-A3470 https//www.nsnlookup.com /fsg-59/fsc-5950/ https//www.nsnlookup.com /fsg-49/fsc-4920/us 4920-
01-046-7358 Balance Chart 4920010467358 010467358,A3470 enable JavaScript in your web browser . 5935-
59/fsc-5935/it 5935-15-213-0126 RQST NE Updated Every Day 5935-15-213-0126 RQST Updated Every Day -A3470
https//www.nsnlookup.com /fsg-49/fsc-4920/us 4920-01-046-7358 Balance Chart 4920010467358 010467358,A3470
Restrictions 3040-00-360-3906
3040-00-360-3906 is a Remote Control Lever that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-360-3906
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-360-3906
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- AZ
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
- US Marine Corps (MC40)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- MC01
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
- Brazil (YA01)
- Effective Date:
- 1 Dec 2001
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 3040-00-360-3906
- Part Number
- Manufacturer
- Status
- XB3388
- Manufacturer
- 61208 - Twin Disc, Incorporated (Active)
- Primary Buy
- Primary Buy
- A3470
- 80906 - Blaw-Knox Construction Equipment Co (Active)
- Secondary Buy
- Secondary Buy
- 1K3614
- 11083 - Caterpillar Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 8-6155
- 11083 - Caterpillar Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- A3470
- 61208 - Twin Disc, Incorporated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-00-360-3906
- Characteristic
- Specifications
- FIIG
- Specifications
- A524P0
- Bore Diameter [ABXV]
- 0.750 Inches Nominal
- Bore Length [ADGE]
- 0.377 Inches Minimum And 0.379 Inches Maximum
- Bore Type [ASBP]
- Plain Straight
- Center To Center Distance Between Link And Shaft Holes [BFGW]
- 1.728 Inches Nominal
- Material [MATT]
- Steel
- Link End Hole Diameter [BFHA]
- 0.500 Inches Nominal
- Link End Thickness [BFGY]
- 0.182 Inches Minimum And 0.185 Inches Maximum
- Shaft End Thickness [BFGX]
- 0.182 Inches Minimum And 0.185 Inches Maximum
- Overall Width [ABMK]
- 0.512 Inches Nominal
- Style Designator [STYL]
- Flat, Two Hole Link End
Weapon Systems (WSDC) 3040-00-360-3906
DLA Procurement Analysis 3040-00-360-3906
- Last Stock Position:
- 65 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-00-360-3906
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 0
- Non-combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 3040-00-360-3906
Freight Information 3040-00-360-3906
3040-00-360-3906 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 132330. A Sub NMFC of X. It has a NMFC Description of TRANSMISSIONS/CLUTCHES/PARTS,NOI. 3040-00-360-3906 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 64340 which rates the freight between FCL and LCL. 3040-00-360-3906 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-360-3906 is not classified as a special type of cargo when transported by water. 3040-00-360-3906 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-360-3906
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- --
- --
- --
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Preservative Coating Only
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- No Requirement
- Not Applicable
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Procurement History 3040-00-360-3906 2 Records
Contracting Technical Data File (CTDF) 3040-00-360-3906 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: