Premium Information is available for this item - Upgrade for $1 a day
3040-00-356-3441
Shouldered Shaft
3040003563441 003563441 SCB69527 50828
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
January 2023
15
Marketplace 3040-00-356-3441
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-356-3441 5+ Documents (More...)
(Identification) 1/2 NSN 3040-00-356-3441 (Identification) 2/2 - - 1.
United States (US) 4. 3040-00-356-3441 Marketplace Restrictions Approved Sources Datasheet Management
D7177 - Rheinmetall Electronics Gmbh (Active) Primary Buy RNCC 3 RNVC 2 DAC 2 M-KPG-481222-50828 Part
NumberManufacturerStatusM-KPG-481222- 50828 https//www.nsnlookup.com /fsg-49/fsc-4935/de 4935-12-312
JavaScript in your web browser . 3040-00-116-3548Rigid Connecting Link3040001163548 001163548 6425-50828
JavaScript in your web browser . 3040-00-116-3548Rigid Connecting Link3040001163548 001163548 6425-50828
/fsg-31/fsc-3120/us
Updated Every Day 3120-01-017-4004 RQST Updated https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-356-3441
Shouldered Shaft 3040003563441 003563441 011236801,50828 Buy RNCC 3 RNVC 2 DAC 2 M-KPG-481222-50828
https//www.nsnlookup.com /fsg-49/fsc-4935/de 4935-12-312-4871 Test Adapter 4935123124871123124871 -50828
D7177 - Rheinmetall Electronics Gmbh (Active) Primary Buy RNCC 3 RNVC 2 DAC 2 M-KPG-481222-50828 Part
Restrictions 3040-00-356-3441
3040-00-356-3441 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-00-356-3441
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-356-3441
- Austria (WB01)
- Effective Date:
- 1 Feb 2005
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Jun 2006
Approved Sources 3040-00-356-3441
- Part Number
- Manufacturer
- Status
- 50828
- Manufacturer
- 82423 - Kleinschmidt Inc (Obsolete)
- Original Design
- Original Design
- SCB69527
- 80063 - Us Army Communications & Electronics (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-00-356-3441
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.1870 Inches Nominal
- First End Style [AAGZ]
- Plain
- Material Document And Classification [MDCL]
- Qq-S-633 Fed Spec All Material Responses
- Material [MATT]
- Steel Comp 1010 Or Steel Comp 1020
- Largest Step Diameter [CSPY]
- 0.250 Inches Nominal
- Second End Diameter [AMFZ]
- 0.2500 Inches Nominal
- Second End Distance From End To Groove [AMFQ]
- 0.031 Inches Nominal
- Second End Groove Width [AAHW]
- 0.0200 Inches Nominal
- Second End Hole Diameter [AMGS]
- 0.0630 Inches Nominal
- Second End Distance From Hole Center To End [AMGT]
- 0.240 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.1800 Inches Nominal
- Second End Style [AAHP]
- Cross Drilled And Circular Grooved
- Overall Length [ABHP]
- 0.7812 Inches Nominal
- Step Quantity [ATPC]
- 2
- Surface Finish [CSYM]
- 16.0 Microinches
Similar Supply Items to 3040-00-356-3441
Freight Information 3040-00-356-3441
3040-00-356-3441 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 116250. A Sub NMFC of X. It has a NMFC Description of TYPEWRITERS/TELETYPEWRITERS/PARTS. 3040-00-356-3441 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 59490 which rates the freight between FCL and LCL. 3040-00-356-3441 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 734 for ocean manifesting and military sealift. 3040-00-356-3441 is not classified as a special type of cargo when transported by water. 3040-00-356-3441 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-356-3441
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- 4.0" H x 1.0" W x 1.0" L
- --
- --
- --
- Any Suitable Process
- 4.0" H x 1.0" W x 1.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- --
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box