Premium Information is available for this item - Upgrade for $1 a day
3040-00-340-3719
Shouldered Shaft
3040003403719 003403719 SM-C-186955 54729
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
January 2023
4
Marketplace 3040-00-340-3719
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-340-3719 5+ Documents (More...)
(Identification) 1/2 NSN 3040-00-340-3719 (Identification) 2/2 - - 1.
SM-C-186955 SHAFT,SHOULDERED 1 EA NS Request Quotation Updated Every Day 3040-00-340-3719 RQST NE Updated
Shouldered Shaft 3040003403719 003403719 $1 a day Upgrade your Account Upgrade 3040-00-340-3719Shouldered
Shaft3040003403719 003403719 SM-C-186955 SM-C-186955 SHAFT,SHOULDERED 1 EA NS Request Quotation Updated
www.nsnlookup.com /fsg-58/fsc-5840/uk 5840-99-463-5055 Operatin Thermostat 5840994635055994635055 P1ND0110611-54729
Thermostat 6685994633201994633201,P1ND011 how to enable https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-340-3719
www.nsnlookup.com /fsg-59/fsc-5905/uk 5905-99-759-4395 https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-340-3719
Shouldered Shaft 3040003403719 003403719 463-5055 Part NumberManufacturerStatus0611-54729 https
ZU01) Effective Date:1 Apr 1991 Approved Sources 1560-00-793-1129 Part NumberManufacturerStatus249-54729
Restrictions 3040-00-340-3719
3040-00-340-3719 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-00-340-3719
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-340-3719
- Republic of Korea (ZH)
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
Approved Sources 3040-00-340-3719
- Part Number
- Manufacturer
- Status
- SM-C-186955
- Manufacturer
- 80063 - Us Army Communications & Electronics (Active)
- Primary Buy
- Primary Buy
- 54729
- 82423 - Kleinschmidt Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3040-00-340-3719
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.2494 Inches Nominal
- First End Distance From End To Flat [AMCM]
- 0.063 Inches Nominal
- First End Grooved Flat Depth [AMFH]
- 0.0304 Inches Nominal
- First End Grooved Flat Length [AMFG]
- 0.3750 Inches Nominal
- First End Style [AAGZ]
- Flat Grooved
- Fsc Application Data [ZZZV]
- Teletype And Facsimile Equipment
- Material [MATT]
- Steel
- Largest Step Diameter [CSPY]
- 0.3742 Inches Nominal
- Second End Diameter [AMFZ]
- 0.3276 Inches Nominal
- Second End Angle Between Flats [CXYR]
- 58.0 Degrees Nominal
- Second End Step Length [CTBM]
- 0.4062 Inches Nominal
- Second End Style [AAHP]
- Two Flats
- Overall Length [ABHP]
- 6.394 Inches Nominal
- Special Features [FEAT]
- 5First End Has Double Flats At 58.0 Deg; Second End Has 0.1875 In. Deep; 0.156 In. Dia Hole; Finish Phqsphated Per K-F-1103; Case Hardening 0.031 To Max Depth Of 0.062 In.; Heat Treated To Rockwell C 45-57; Ends Chamfer 0.015 In. Deep At 45.0 Deg
- Step Quantity [ATPC]
- 18
- Surface Finish [CSYM]
- 32.0 Microinches
NATO Stock Numbers Related to 3040-00-340-3719
Freight Information 3040-00-340-3719
3040-00-340-3719 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 116250. A Sub NMFC of X. It has a NMFC Description of TYPEWRITERS/TELETYPEWRITERS/PARTS. 3040-00-340-3719 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 59490 which rates the freight between FCL and LCL. 3040-00-340-3719 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 658 for ocean manifesting and military sealift. 3040-00-340-3719 is not classified as a special type of cargo when transported by water. 3040-00-340-3719 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.