Premium Information is available for this item - Upgrade for $1 a day
3040-00-337-1389
Shouldered Shaft
3040003371389 003371389 62447
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
22
Marketplace 3040-00-337-1389
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-337-1389 5+ Documents (More...)
SHAFT,SHOULDERED 2 EA NS Request Quotation Subscribe to View Vendor Details... 62447 SHAFT 3 EA
NS Request Quotation 62447 SHAFT 3 EA NS Request Quotation Subscribe to View Vendor Details...
TUBING,NONMETALLIC 140 RL NS Request Quotation 62447 TUBING,NONMETALLIC 140 RL NS Request Quotation
https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-337-1389 Shouldered Shaft 3040003371389 003371389
JavaScript in your web browser . 5998-01-241-8118Circuit Card Assembly5998012418118 01241811807970-62447
JavaScript in your web browser . 5998-01-241-8118Circuit Card Assembly5998012418118 01241811807970-62447
https//www.nsnlookup.com /fsg-48/fsc-4820/us 4820-01-218-6157 Valve Disk 4820012186157 012186157,9-62447
4720-22-257-3127 Hydraulic Hose 4720222573127 222573127,62447 Valve Disk 4820012186157 012186157,9-62447
SIGHT,FRONT 140 EA NS Request Quotation 62447 SIGHT,FRONT 140 EA NS Request Quotation Updated Every
JavaScript in your web browser . 5998-01-241-8118Circuit Card Assembly5998012418118 01241811807970-62447
Restrictions 3040-00-337-1389
3040-00-337-1389 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-00-337-1389
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-337-1389
- US Navy (N9BC)
- Effective Date:
- 1 Aug 2004
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HD
- Poland (WP01)
- Effective Date:
- 1 Feb 2005
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 3040-00-337-1389
- Part Number
- Manufacturer
- Status
- 62447
- Manufacturer
- 03848 - Arma Div (Obsolete)
- Original Design
- Original Design
- 62447
- 32872 - Cub Co (Obsolete)
- Advisory Reference
- Advisory Reference
Datasheet 3040-00-337-1389
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.2500 Inches Nominal
- First End Groove Width [AAHG]
- 0.0310 Inches Nominal
- First End Distance From End To Groove [AMCY]
- 0.500 Inches Nominal
- First End Groove Diameter [AAHH]
- 0.1880 Inches Nominal
- Material [MATT]
- Copper Alloy
- Largest Step Diameter [CSPY]
- 0.312 Inches Nominal
- Second End Diameter [AMFZ]
- 0.3125 Inches Nominal
- Overall Length [ABHP]
- 2.156 Inches Nominal
Weapon Systems (WSDC) 3040-00-337-1389
DLA Procurement Analysis 3040-00-337-1389
Management Data 3040-00-337-1389
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3040-00-337-1389
Freight Information 3040-00-337-1389
3040-00-337-1389 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-337-1389 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-337-1389 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-337-1389 is not classified as a special type of cargo when transported by water. 3040-00-337-1389 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-337-1389 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: