Premium Information is available for this item - Upgrade for $1 a day
3040-00-301-7910
Shouldered Shaft
3040003017910 003017910 9-24887-1
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
6
Marketplace 3040-00-301-7910
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-301-7910 3+ Documents (More...)
/fsc-3040/us 3040-00-301-7910 Shouldered Shaft 3040003017910003017910 Day 3040-00-301-7910 RQST NE Updated
Every Day 3040-00-301-7910 RQST Updated Every Day 3040-00-301-7910 /fsc-3040/us 3040-00-301-7910 Shouldered
E. https//www.nsnlookup.com /fsg-30/fsc-3040/us 3040-00-301-7910 Shouldered Shaft 3040003017910 003017910
Incomplete Secondary Reference RNCC 5 RNVC 1 DAC 4 24887 https// DAC 5 9-24887-1 06DM5 - Infinity Fabrication
Shouldered Shaft 3040003017910 003017910 /us 3040-01-232-7212 Linear Actuating Cylinder Piston
Rod,25362 www.nsnlookup.com /fsg-30/fsc-3040/us - DAC 5 9-24887-1 06DM5 - Infinity Fabrication, Inc.
Restrictions 3040-00-301-7910
3040-00-301-7910 is a Shouldered Shaft that is an aviation critical safety item or flight safety critical aircraft part. This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a confirmed Commerce Control List Item (CCLI). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-00-301-7910
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-301-7910
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
Approved Sources 3040-00-301-7910
- Part Number
- Manufacturer
- Status
- 9-24887-1
- Manufacturer
- 81205 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- 9-24887-1
- 0P657 - Camnetics Manufacturing Corporation (Active)
- Secondary Buy
- Secondary Buy
- 9-24887-1
- 34336 - Tect Hypervelocity, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 9-24887-1
- 14248 - Harlow Aerostructures, Llc (Active)
- Secondary Buy
- Secondary Buy
- 9-24887-1
- 59213 - Aero Components, Llc (Active)
- Secondary Buy
- Secondary Buy
- 9-24887-1
- 06DM5 - Infinity Fabrication, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 9-24887-1
- 3L665 - C. E. Machine Co., Inc. (Active)
- Secondary Buy
- Secondary Buy
- 9-24887-1
- 1P642 - Volumatic Inc (Active)
- Secondary Buy
- Secondary Buy
- 9-24887-1
- 29957 - Nordam Group Llc, The (Active)
- Secondary Buy
- Secondary Buy
- 9-24887-1
- 0BT76 - Pro-Fab, Llc (Active)
- Secondary Buy
- Secondary Buy
- 9-24887-1
- 2V045 - Malones Cnc Machining Inc (Active)
- Secondary Buy
- Secondary Buy
- 9-24887-1
- 0C7H8 - D-J Engineering Inc (Active)
- Secondary Buy
- Secondary Buy
- 9-24887-1
- 32664 - Aerometals, Inc. (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3040-00-301-7910
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Item Identification [AGAV]
- B-52 Acft
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 1.2490 Inches Minimum And 1.2500 Inches Maximum
- First End Groove Width [AAHG]
- 0.2600 Inches Nominal
- First End Distance From End To Groove [AMCY]
- 0.4500 Inches Nominal
- First End Groove Diameter [AAHH]
- 1.2400 Inches Nominal
- First End Spline Length [AMDM]
- 0.0600 Inches Nominal
- First End Spline Major Diameter [AMDP]
- 1.0870 Inches Nominal
- First End Spline Minor Diameter [AMDN]
- 1.0120 Inches Nominal
- First End Spline Quantity [BDSQ]
- 34
- First End Style [AAGZ]
- Circular Grooved, Woodruff Keyway And Splined (Straight)
- Material [MATT]
- Steel Comp 4130
- Largest Step Diameter [CSPY]
- 1.500 Inches Nominal
- Second End Diameter [AMFZ]
- 0.9990 Inches Nominal
- Second End Internal Thread Length [AMHP]
- 0.3100 Inches Nominal
- Second End Style [AAHP]
- Internal Threaded
- Overall Length [ABHP]
- 5.089 Inches Nominal
- Special Features [FEAT]
- Upper Side Brace
- Step Quantity [ATPC]
- 6
Weapon Systems (WSDC) 3040-00-301-7910
DLA Procurement Analysis 3040-00-301-7910
- Last Stock Position:
- 1 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-00-301-7910
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- FG
- B-52 STRATO FORTRESS
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 3040-00-301-7910
Freight Information 3040-00-301-7910
3040-00-301-7910 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-301-7910 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-301-7910 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-301-7910 is not classified as a special type of cargo when transported by water. 3040-00-301-7910 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-301-7910 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: