Premium Information is available for this item - Upgrade for $1 a day
3040-00-228-4716
Shouldered Shaft
3040002284716 002284716 4G13366-101A
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
8
Marketplace 3040-00-228-4716
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-228-4716 5+ Documents (More...)
Restrictions 3040-00-228-4716
3040-00-228-4716 is a Shouldered Shaft that does not have a nuclear hardened feature, but does have another critical feature or features such as tolerance, fit restriction or application. This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a confirmed Commerce Control List Item (CCLI). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-00-228-4716
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-228-4716
- US Air Force (FUGC)
- Effective Date:
- 1 Nov 2009
- Former MOE Rule:
- FUU5
Approved Sources 3040-00-228-4716
- Part Number
- Manufacturer
- Status
- 4G13366-101A
- Manufacturer
- 98897 - Lockheed Martin Corp (Active)
- Primary Buy
- Primary Buy
- 4G13366-101A
- 32664 - Aerometals, Inc. (Active)
- Secondary Buy
- Secondary Buy
- 4G13366-101A
- 6Z056 - Cm Manufacturing Inc (Active)
- Secondary Buy
- Secondary Buy
- 4G13366-101A
- 1DDX0 - Machine Specialties, Llc (Active)
- Secondary Buy
- Secondary Buy
- 4G13366-101A
- 1FG56 - Hydromach Inc (Active)
- Secondary Buy
- Secondary Buy
- 4G13366-101A
- 36164 - Heroux-Devtek Inc (Active)
- Secondary Buy
- Secondary Buy
- 4G13366-101A
- 4JZH8 - Es3 Prime Logistics Group Inc (Active)
- Secondary Buy
- Secondary Buy
- 4G13366-101A
- 1C739 - Devtek Aerospace Inc (Active)
- Secondary Buy
- Secondary Buy
- 4G13366-101A
- 4N455 - S F M Company Inc (Active)
- Secondary Buy
- Secondary Buy
- 4G13366-101A
- 13002 - Goodrich Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 4G13366-101A
- 6K4C8 - Goodrich Corporation (Active)
- Advisory Reference
- Advisory Reference
Datasheet 3040-00-228-4716
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Style [AAGZ]
- Unthreaded Cross Drilled
- Material [MATT]
- Steel
- Largest Step Diameter [CSPY]
- 1.935 Inches Minimum And 1.936 Inches Maximum
- Second End Style [AAHP]
- External Threaded
- Overall Length [ABHP]
- 9.260 Inches Nominal
- Special Features [FEAT]
- Smaller End Has A Bore,0.060 In. Thru And 1.130 In. Deep,Counterbored,0.120 In. Dia. And 1.220 In. Deep,And Tap Drilled 0.250 In. With The Following Spec: 1/4-28 Unf-2B,Also,This End Has A Keyway,0.125 To 0.135 In. Wide,Centered 85.0 To 95.0 Deg. To The Cross Drill At The Opposite End. The Larger End Is Slotted,0.877 To 0.882 In. Wide And 0.205 To 0.235 In. Deep,Centered 90.0 Deg,To Cross Drill. Cross Drill Is Partially Threaded On One Side,0.171 To 0.201 In. Deep,7/16-20 Unjf-3B,Larger End (Shoulder) Is Bored,1.055 To 1.065 In. Dia And 3.340 To 3.460 In. Deep. Item Is Tapered 10.0 Deg Between The Shoulder And The Third Step First End.
Weapon Systems (WSDC) 3040-00-228-4716
DLA Procurement Analysis 3040-00-228-4716
- Last Stock Position:
- 314 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-00-228-4716
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- LE
- LANDING GEAR SYSTEMS AND COMPONENTS
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3040-00-228-4716
Freight Information 3040-00-228-4716
3040-00-228-4716 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-228-4716 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-228-4716 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-228-4716 is not classified as a special type of cargo when transported by water. 3040-00-228-4716 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-228-4716
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Electrical Instrument
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-10924, Grease, Automotive and Artillery (GAA)
- No Requirement
- PPP-C-795, Cellular Plastic Film Cushioning; or A-A-3129, Open Cell Plastic Cushioning; or PPP-C-1797, Polypropylene Foam Cushioning; or A-A-59136, Polyethylene Foam Cushioning
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 3040-00-228-4716 1 Records
Contracting Technical Data File (CTDF) 3040-00-228-4716 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: