Premium Information is available for this item - Upgrade for $1 a day
3040-00-215-9544
Shouldered Shaft
3040002159544 002159544 73653
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
November 2023
28
![AAGZ Style 10 for 3040-00-215-9544 1/1 AAGZ Style 10 for 3040-00-215-9544 1/1](https://image.nsnlookup.com/iig/600/ae10010.webp)
Marketplace 3040-00-215-9544
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-215-9544 5+ Documents (More...)
for $1 a day Upgrade your Account Upgrade 3040-00-215-9544Shouldered Shaft3040002159544 002159544 73653
to View Vendor Details... 73653 SHAFT,SHOULDERED 2 EA NS Request Quotation 73653 SHAFT,SHOULDERED 2
Shouldered Shaft 3040002159544 002159544 3040-00-215-9544 3040002159544 002159544 is a shaft having
Shouldered Shaft 3040002159544 002159544 View Vendor Details... 73653 SWITCH,PUSH 2 EA NS https
What is CAGE Code 73653?
73653 refers to Diamond Manufacturing Company, Inc Div Diamond Manufacturing located at 243 W 8Th St,
ActiveType: ManufacturerDun & Bradstreet (DUNS): 003038031 Active Manufacturer with the Cage Code 73653
8405-99-130-5177 Man's Overcoat 8405991305177 991305177 SHAFT,SHOULDERED 2 ) with the Cage Code 73653
Restrictions 3040-00-215-9544
3040-00-215-9544 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3040-00-215-9544
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-215-9544
- US Air Force (FGGC)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- FGAX
- US Navy (N9BC)
- Effective Date:
- 1 Apr 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- HDKE
- Poland (WP01)
- Effective Date:
- 1 Aug 2011
- Brazil (YA01)
- Effective Date:
- 1 Aug 2000
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Norway (ZT01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Mar 2008
- Turkey (ZW01)
- Effective Date:
- 1 Nov 1998
Approved Sources 3040-00-215-9544
- Part Number
- Manufacturer
- Status
- 73653
- Manufacturer
- 72599 - Alliedsignal Inc Dba Allied-Signal (Replaced)
- Original Design
- Original Design
- 73653
- 99193 - Honeywell International Inc. (Active)
- Secondary Buy
- Secondary Buy
- 73653
- 70210 - Honeywell International Inc. (Active)
- Advisory Reference
- Advisory Reference
Datasheet 3040-00-215-9544
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.5620 Inches Nominal
- First End Style [AAGZ]
- Slotted
- First End Slot Depth [AMDW]
- 0.240 Inches Nominal
- First End Slot Width [AKTM]
- 0.100 Inches Nominal
- Material [MATT]
- Steel
- Largest Step Diameter [CSPY]
- 0.700 Inches Nominal
- Second End Diameter [AMFZ]
- 0.7000 Inches Nominal
- Second End Slot Depth [AMGR]
- 0.150 Inches Nominal
- Second End Slot Width [AKTN]
- 0.100 Inches Nominal
- Second End Style [AAHP]
- Slotted
- Overall Length [ABHP]
- 1.266 Inches Nominal
- Step Quantity [ATPC]
- 3
Weapon Systems (WSDC) 3040-00-215-9544
DLA Procurement Analysis 3040-00-215-9544
- Last Stock Position:
- 3 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3040-00-215-9544
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3040-00-215-9544
Freight Information 3040-00-215-9544
3040-00-215-9544 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-215-9544 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-215-9544 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-215-9544 is not classified as a special type of cargo when transported by water. 3040-00-215-9544 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3040-00-215-9544
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 4.0" H x 4.0" W x 1.0" L
- --
- --
- Preservative Coating Only
- Any Suitable Process
- 4.0" H x 4.0" W x 1.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
- --
- --
- MIL-DTL-117, Bag
- No special marking
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3040-00-215-9544 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: