Premium Information is available for this item - Upgrade for $1 a day
3040-00-197-3626
Shouldered Shaft
3040001973626 001973626 502562
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft
May 2023
2
Marketplace 3040-00-197-3626
Request a Quotation from participating marketplace vendors
Related Documents 3040-00-197-3626 5+ Documents (More...)
3626Shouldered Shaft3040001973626 001973626 502562 Request a Quotation from participating marketplace
vendors Request Subscribe to View Vendor Details... 502562 $1 a day Upgrade your Account Upgrade 2840
Request a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 502562
in your web browser . 5315-66-155-8885Headless Shoulder Pin5315661558885 661558885 471-50809-128 502562
NumberManufacturerStatus471-50809-128 S3482 - Saab Kockums Ab - Malmo (Replaced) Primary Buy RNCC 3 RNVC 2 DAC D 502562
Restrictions 3040-00-197-3626
3040-00-197-3626 is a Shouldered Shaft that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3040-00-197-3626
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3040-00-197-3626
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
Approved Sources 3040-00-197-3626
- Part Number
- Manufacturer
- Status
- 502562
- Manufacturer
- 19139 - Eastman Kodak Co (Active)
- Original Design
- Original Design
Datasheet 3040-00-197-3626
- Characteristic
- Specifications
- FIIG
- Specifications
- A23200
- End Similarity [AAHN]
- Not Identical
- First End Diameter [AMDL]
- 0.3740 Inches Nominal
- First End Groove Diameter [AAHH]
- 0.3500 Inches Minimum And 0.3550 Inches Maximum
- First End Groove Width [AAHG]
- 0.0250 Inches Minimum And 0.0300 Inches Maximum
- First End Distance From End To Groove [AMCY]
- 1.850 Inches Nominal
- First End Style [AAGZ]
- Circular Grooved
- Material [MATT]
- Steel Corrosion Resisting
- Largest Step Diameter [CSPY]
- 0.374 Inches Nominal
- Material Document And Classification [MDCL]
- Eastman Kodak Ek-135B Mfr Ref All Material Responses
- Second End Distance From End To Groove [AMFQ]
- 1.500 Inches Nominal
- Second End Diameter [AMFZ]
- 0.3740 Inches Nominal
- Second End Groove Diameter [AAHX]
- 0.3500 Inches Minimum And 0.3550 Inches Maximum
- Second End Groove Width [AAHW]
- 0.0250 Inches Minimum And 0.0300 Inches Maximum
- Second End Style [AAHP]
- Circular Grooved
- Overall Length [ABHP]
- 8.488 Inches Nominal
- Step Quantity [ATPC]
- 11
DLA Procurement Analysis 3040-00-197-3626
Management Data 3040-00-197-3626
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Mar 2023
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2021
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2020
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- Oct 2019
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 1
- EA
- May 2013
- Department of the Air Force (DF)
- EA
- Subscribe
- 1
- EA
- MOE
- USC
- Code
- Statement
- Order of Use
- Jump To Code
- Qty Per Assy
- UOM
- Technical Document
- Quantative Expression
- Code
- Defense Logistics Agency (DS)
- I
- X
- Formerly 6740
- X
Air Force
- Fund:
- LP
- Items initially authorized for local purchase
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3040-00-197-3626
Freight Information 3040-00-197-3626
3040-00-197-3626 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 126900. A Sub NMFC of Z. It has a NMFC Description of POWER TRANS SHAFTING/SHAFTS. 3040-00-197-3626 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 65750 which rates the freight between FCL and LCL. 3040-00-197-3626 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3040-00-197-3626 is not classified as a special type of cargo when transported by water. 3040-00-197-3626 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3040-00-197-3626 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: